3 PT cememt mixer cylinder

[Halftrack]

i have the earlier (apparently smaller mixer) that I bought from an individual, who had never used it. The cylinder would not extend and finally had to pull it anchored with the tractor. It extended but there was a huge burr that gouged the rod, now junk. Ordered a replacement from SURPLUS CENTER current part# 9-12229-16, which comes with 3/4" ball ends, 1" rod, 2" tube and 16" travel. Ordered hose and ends at same time.

 

[dfkrug]

Ordered a replacement from SURPLUS CENTER current part# 9-12229-16, which comes with 3/4" ball ends, 1" rod, 2" tube and 16" travel.

That one looks WAY better.

 

[Halftrack]

See this thread for my hydraulic drive conversion for the mixer.

Another pto/hydraulic cement mixer conversion

Bought this mixer from an older gentleman in the neighborhood last fall. He had bought it new, but never used it, due to a heart issue, so it sat. I tried it on my TC33D, but found I would have to cut to pto shaft down to nothing to make it work (?) and then it would not work on another tractor...

www.tractorbynet.com

(still having issues with paragraphs)

Biggest plus with hydro drive is can spin drum while dumping.

 

[Halftrack]

Sorry to get so far off track from azrancher's original request for cylinder seals, but there seems to be the interest. With the hydraulic dump, I believe you will need a flow restrictor on that hose. TSC has 1/2" and 3/8" restrictors part# 125678399/299 that I have used for many applications.