Good morning!!!!

   / Good morning!!!! #181,771  
Made it to FireWise cedar clearing this morning. With no breeze it seemed warmer than 40s. Knee felt good with no pain pills on board and I was able to work the entire two hours. Yea! 19 people showed up including my ASL language instructor made for fast work.
IMG_2494.JPG
IMG_2498.JPG
 
Last edited:
   / Good morning!!!! #181,772  
First Texas get together that I attended was in 2005 at Jinman’s. Next one was at Txdon‘s. In 2007 we met at Eddie Walkers. For the next 10 years we visited the people we met at those get togethers on our trips to and from spending winter in the southwest.
Good Evening Ron,
I dont know if you remember, but I sent Eddie Walker two quarts of maple syrup that my neighbor made in Vermont ! That was for his Texas get together ! That was a long time ago ! ;)
 
   / Good morning!!!! #181,773  
Good Evening Ron,
I dont know if you remember, but I sent Eddie Walker two quarts of maple syrup that my neighbor made in Vermont ! That was for his Texas get together ! That was a long time ago ! ;)
I remember now that you mentioned it. I brought some Drakes batter mix for frying. Went over good.
Here is Link to the first get together I attended.
 
Last edited:
   / Good morning!!!! #181,774  
Good (Wednesday) morning. Overnight Low of 8.5C and it's presently 23.6C (already 1.6C above the predicted High and it's only 1022). Fairly clear with a gentle breeze.

Gave myself a haircut yesterday and then 'got stuck into' collecting/disposing of tree branches. 3 ute loads and I estimate another 5-6 to go... I'm in no hurry but I do have to stretch the old muscles prior to or I'll 'pay for it' at bedtime.

It's 'into town day' for mail & groceries, then back at the branch collection.

That's about it, take care all.
 
   / Good morning!!!! #181,778  
Rip strong positive thoughts to you.

Kyle sorry for your.

Mostly your posting like daybreak always looking forward to them.
 
   / Good morning!!!! #181,780  
I have never found a good way of saving a tube of caulk; they always seem to harden. Nail in end, screw in end, sooner or later it all
turns to rubber.

I use these-
I use a lot of PL Premium urethane construction adhesive, I buy it by the case, and the same with the caulk caps.
 

Tractor & Equipment Auctions

30ft Sticks Mix Match Irrigation Pipe with Trailer (A52128)
30ft Sticks Mix...
2025 12V Diesel Pump and Hose with Meter (A50324)
2025 12V Diesel...
Ford NAA Jubilee Tractor (A52128)
Ford NAA Jubilee...
Road Brute Flat Deck Trailer (A50514)
Road Brute Flat...
Auger Skid Steer Attachment (A50322)
Auger Skid Steer...
2014 New Holland T8.360 MFWD Tractor (A52128)
2014 New Holland...
 
Top