Good morning!!!!

   / Good morning!!!! #174,771  
Take your time — I am in no rush!

this is a grab off the Internet because I don’t have one:
View attachment 815125
if you need to bore a hole down near the floor or in a corner, you either needed to rely on the ratchet mechanism of a standard brace (if it had a ratchet, many did not) or one of these. The gearbox let you turn the bit continuously while getting you away from the floor or wall for full rotation.
Where does the battery go? 😂
 
   / Good morning!!!! #174,772  
Hmmmm, Drew can trade up and sell you his.

re: trikes
I'm wanting either a trike or a good flat-sidecar/electric bike combo. I frequently need to transport "stuff" between my shops and the house (~100+ yards).
Driving the Ford Escape or my F350 is drastic overkill, dragging a garden cart is getting tiring.
 
   / Good morning!!!! #174,773  
Hope you get driveway cleared to have breakfast with professor.
Paul that was big tree down, did you have lunch with the professor?
I actually made it to breakfast. Cut the tree up enough to clear the lane with the grapple on the tractor, then cleaned it all up after breakfast.
It was bigger than it looked, tractor struggled to pick it up, had to cut it first. Lift capacity with the grapple is over a ton.
 
   / Good morning!!!! #174,774  
re: trikes
I'm wanting either a trike or a good flat-sidecar/electric bike combo. I frequently need to transport "stuff" between my shops and the house (~100+ yards).
Driving the Ford Escape or my F350 is drastic overkill, dragging a garden cart is getting tiring.
not sure about availability in the US but these bikes come in many configurations from just cargo or fancier versions and would be able to perhaps do what you wanted.

 
   / Good morning!!!! #174,775  
Good Morning!!!! 67F @ 4:30AM. Sunny to partly cloudy. High 92F. Winds S at 5 to 10 mph.

Never heard of such a thing as a floor auger, KJC, but I can see how they would be useful. And so would an electric version.

Got a couple coats of wax on the back and driver's side of the van before it got too hot yesterday, so all that's left is the front. Not gonna use the foam cannon on it, as foam goes everywhere. Also got the welds I made on the motorcycle ramp painted, so that job's done.

Only headed into the low 90s today, so might get some tinkering done on a motorcycle, but might just siesta in the afternoon again. I can see that becoming a habit.

Hump Day already?!?
 
   / Good morning!!!! #174,776  
It will be a few weeks. There are boxes I have not looked in yet and I'm running out of room. I'll keep you in mind.
What does a floor auger look like that you are envisioning?
It will be a few weeks. There are boxes I have not looked in yet and I'm running out of room. I'll keep you in mind.
What does a floor auger look like that you are envisioning?

fast forward to 2:15 for the operation
 
   / Good morning!!!! #174,777  
Good Morning, 64 going to 85 today no rain

Making some brackets for the RTV to be able to carry the Makita trimmer without laying across the load bed. Painted them yesterday and looking to cover them with something to not scratch up the trimmer. Perhaps rubber strips from tractor inner tube

Will get the PT done early today. And still more firewood to stack

Watched some overland travel videos going around the world in 3 years. Next segments going across Canada
 
   / Good morning!!!! #174,778  
Good Morning
It’s 69 with a high of 80 forecast under a sunny sky.

Yesterday was tree clearing, then lunch and Costco with the wife. Cleaned up and serviced chainsaws, pushed brush pile back to conclude that adventure. Friend came over that is restoring the 69 Firebird that he had since he was a kid. Helped him make some hardware that secures the T-Tops. New or repop parts are not available, so he will have some nice stainless parts to replace the worn pot metal ones that he has.
Grandson came up to say good night again, I think it’s more to postpone his bedtime than because he really loves his grandparents, but I’ll take it regardless.

Not much planned for today other than mowing, and loading manure into a neighbors dump truck. He said he will take all that we have, which is a nearly full bin at the moment. Airport Authority meeting tonight, so I’ll be occupied all day, but not busy, unless something pops up, which is not uncommon.
 
   / Good morning!!!! #174,779  
65F cloudy sky low humidity 5+ mph wind from north. :)

Outside chores done aftwards started picking up branches limbs from yesterday storm...now it E muffin time. :)

caught little Boo peaking into pickup last evening,I said somewhat loud voice CAN I HELP YOU...he sat down look to heavens than slowly walk away with head down...going to have keep eye on him.

Plans for today...continue picking up branches limbs,2 stops in town for critter food than see what the day offers.

Enjoy your day all.
 
   / Good morning!!!! #174,780  
Good Morning Guys,
61 to start and going to 79 ! Partly sunny with less humidity, going to do a little trimming today. Also the workbench looks like it needs a bit of cleaning and or organizing !

Mike Z, glad to see another Deutschmen in the group ! ;)

All have a safe and blessed day !
 

Tractor & Equipment Auctions

Kubota 24in Quick Attach Compact Excavator Tooth Bucket ONE PER LOT (A52128)
Kubota 24in Quick...
2023 AVANT 735 COMPACT WHEEL LOADER (A51242)
2023 AVANT 735...
Ih 490 Disk (A50514)
Ih 490 Disk (A50514)
2019 CATERPILLAR 308 CR EXCAVATOR (A50458)
2019 CATERPILLAR...
2022 INTERNATIONAL MV607 26FT BOX TRUCK (A51222)
2022 INTERNATIONAL...
2007 Ford F350 Super Duty (A50514)
2007 Ford F350...
 
Top