daugen
Epic Contributor
I think so, will find out more this afternoon.
Good morning!!!!
- Thread starter 300UGUY
- Start date
- Views: 17211682
Buppies
Super Star Member
- Joined
- Oct 26, 2011
- Messages
- 12,205
- Location
- SouthWestern Virginia
- Tractor
- Kubota L5240 EX mark 60 in 29 hp Toro 60inch Z Master 21 inch walk behind Polaris 900 hunter edition 30in toro walk behind
49 high of 70 today already had light shower more rain Thursday and Friday
Prayers for all our Country
Prayers for all our Country
Buppies
Super Star Member
- Joined
- Oct 26, 2011
- Messages
- 12,205
- Location
- SouthWestern Virginia
- Tractor
- Kubota L5240 EX mark 60 in 29 hp Toro 60inch Z Master 21 inch walk behind Polaris 900 hunter edition 30in toro walk behind
Feel better soon Kilroy, LS glad you are feeling better, Sodamo glad eye lids are healing. Drew when I had shoulder surgery shoveled asphalt six weeks later.
Sorry about water heater m7040
Sorry about water heater m7040
RedNeckGeek
Super Member
- Joined
- Jan 1, 2011
- Messages
- 8,753
- Location
- Butte County & Orcutt, California
- Tractor
- Kubota M62, Kubota L3240D HST (SOLD!), Kubota RTV900
Good Morning!!!! 42F @ 5:30AM. Sunny. High 59F. Winds NW at 10 to 15 mph.
Yesterday's forecast called for snow, and snow it did. One very large, very dark cloud approached from the north, the wind picked up, the temperature plummeted, and I headed for the barn on the tractor. And I watched out the window as tiny wet flakes fell for a few minutes, not even enough to wet the concrete. That was plenty, though.
Double rainbow! Did you find the pot of gold at the end, David?
Cut the trunk off the stump using the little Makita electric saw, which continues to amaze me with what it'll do. Still couldn't move the stump up the hill with a chain, so ended up flipping it over with the FEL until it was far enough along I had dry dirt under the wheels. Left a big drag mark, but the field grass will soon fill that over. Gathered up a bunch more sticks and added them to the stump to start a new burn pile, but will need the landscape rake to do that job right. The snow cloud came in and finished that effort for the afternoon.
New o-ring lined sealing washer showed up, so stuck one on the leaky oil drain plug on the Ford. I'll know this morning if it did the trick.
Got a trip to town on for today, groceries and trips to the Ford and VW dealers so see about vehicles. Probably not much more will get done.
Happy Hump Day!
Yesterday's forecast called for snow, and snow it did. One very large, very dark cloud approached from the north, the wind picked up, the temperature plummeted, and I headed for the barn on the tractor. And I watched out the window as tiny wet flakes fell for a few minutes, not even enough to wet the concrete. That was plenty, though.
Double rainbow! Did you find the pot of gold at the end, David?
Cut the trunk off the stump using the little Makita electric saw, which continues to amaze me with what it'll do. Still couldn't move the stump up the hill with a chain, so ended up flipping it over with the FEL until it was far enough along I had dry dirt under the wheels. Left a big drag mark, but the field grass will soon fill that over. Gathered up a bunch more sticks and added them to the stump to start a new burn pile, but will need the landscape rake to do that job right. The snow cloud came in and finished that effort for the afternoon.
New o-ring lined sealing washer showed up, so stuck one on the leaky oil drain plug on the Ford. I'll know this morning if it did the trick.
Got a trip to town on for today, groceries and trips to the Ford and VW dealers so see about vehicles. Probably not much more will get done.
Happy Hump Day!
kenmbz
Super Member
- Joined
- May 8, 2019
- Messages
- 6,262
- Location
- S.E. PA
- Tractor
- Massey Ferguson GC1720/Simplicity Regents/Echo CS-490/CS-620
Morning all, 43 going up to 64, some sun
Valentines day went well, wife liked presents, order in chinese as son was out and needed to be available to pick him up.
Busy day job today, but want to get into the back area with brush cutter if I have time.
Be well,
Valentines day went well, wife liked presents, order in chinese as son was out and needed to be available to pick him up.
Busy day job today, but want to get into the back area with brush cutter if I have time.
Be well,
m7040
Elite Member
- Joined
- Sep 15, 2006
- Messages
- 3,681
- Location
- Frederick maryland
- Tractor
- Kubota M7040, MF 203 industrial, ZD331, RTV 1100 , Kubota Minix excavator, Unimog 404
That is amazing recovery for shoulder surgery.
LS Tractor Owner
Super Member
- Joined
- May 1, 2017
- Messages
- 7,562
- Location
- Edgewood, NM
- Tractor
- LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
We have a two bulb motion sensitive flood light base. It's all metal. I got it at Walmart for somewhere around $16. But that was 4 years ago..... It's probably more now. The bulbs were more expensive, I think about $16 each. Those I got at Home Depot. I believe 250W equivalent LED floods. They do light up the backyard nicely.Good morning to all. High today near 80, then another front with 20-25 drop. Have to work on taxes if I can squeeze that in. Will try to get to the American Legion coffee meeting this morning.
Needing an "industrial" quality flood light (2 bulb). Want one with a motion sensor to mount on the outside of my metal shop. Want quality and weather "proof". The models I have so far seen are "weather resistant" and many have "plastic housings", some the bulbs are not replaceable! My preference would be a "normal floodlight bulb that I can find when replacement is needed" not a square LED type that I have to order somewhere. This unit will be in the Texas sun all day. NOTHING plastic lasts here for long. Any suggestions where to buy?
All Take Care, wishing you a great day.
buckeyefarmer
Epic Contributor
I like the Rheem Marathon. Used to be most energy efficient, don’t know if it still is. Sure is pricey.
buckeyefarmer
Epic Contributor
53° and sunny
Driveway alarm been working good since I moved it to other side of drive and adjusted it. Need to bury it now
Woke up several times in night, throat little sore, getting sinus gunk. Uh oh.
Took wife out for early supper last night. Had to deal with traffic, yuck.
Rack ribs at Texas Roadhouse were little dry, the onion was good. Brought home leftovers for lunch. Didn’t even cut the cheesecake wife picked up at Costco yesterday.
Did Jack up Subaru and shake each tire trying to find if bearing loose. Didn’t notice anything unusual.
Eyes little blurry this morning, usually from lack of sleep, or staring at phone too long.
Driveway alarm been working good since I moved it to other side of drive and adjusted it. Need to bury it now
Woke up several times in night, throat little sore, getting sinus gunk. Uh oh.
Took wife out for early supper last night. Had to deal with traffic, yuck.
Rack ribs at Texas Roadhouse were little dry, the onion was good. Brought home leftovers for lunch. Didn’t even cut the cheesecake wife picked up at Costco yesterday.
Did Jack up Subaru and shake each tire trying to find if bearing loose. Didn’t notice anything unusual.
Eyes little blurry this morning, usually from lack of sleep, or staring at phone too long.
LS Tractor Owner
Super Member
- Joined
- May 1, 2017
- Messages
- 7,562
- Location
- Edgewood, NM
- Tractor
- LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
Good morning to all! Low of 23°, only going up to 27°. Currently the temp is 22°?? .... I guess a 'new' low..... It's still snowing, but the winds kicked up about a half hour ago. I hope we don't get another big drift.
The crud is trying to hold on to its grip desperately..... just some junky congestion this morning and associated cough. As soon as I get the nose cleared, the coughing stops. Just the remnants, I suppose.
Fritz, you can try and test the thermocouple. Usually they are the troublemakers. Not too expensive to replace.
After years of standard WHs, we went with a condensing tankless propane WH. It's 199K BTU, 98% efficiency. The venting is PVC pipe. We will never go back to a tank WH. It's really nice to never run out of hot water....
Another inside day for sure.... not sure what, if anything I'll get into. One possibility is to adjust a barn door track. I knew one of the lags stripped out when I installed it. Might take the opportunity to fill the hole with some shims and glue and get the lag reset. It's where 2 pieces of track join, one side has dropped about a 1/16", but causes the hanging door to 'bang' when the roller goes across. ...... it's starting to annoy me.....
Kilroy, I appreciate you taking on the crud for me.... always important to try and keep the balance!
Dennis, I appreciate your help also..... sorry about the traffic woes and dry ribs.
Paul, that's one big pile of s*@&..... I mean manure.....Good that you have a place to take it to..... I still remember all the farm dumping the manure out on the fields along 313 just outside of Doylestown. Stunk up the whole area.....
Everyone have a great day!
The crud is trying to hold on to its grip desperately..... just some junky congestion this morning and associated cough. As soon as I get the nose cleared, the coughing stops. Just the remnants, I suppose.
Fritz, you can try and test the thermocouple. Usually they are the troublemakers. Not too expensive to replace.
After years of standard WHs, we went with a condensing tankless propane WH. It's 199K BTU, 98% efficiency. The venting is PVC pipe. We will never go back to a tank WH. It's really nice to never run out of hot water....
Another inside day for sure.... not sure what, if anything I'll get into. One possibility is to adjust a barn door track. I knew one of the lags stripped out when I installed it. Might take the opportunity to fill the hole with some shims and glue and get the lag reset. It's where 2 pieces of track join, one side has dropped about a 1/16", but causes the hanging door to 'bang' when the roller goes across. ...... it's starting to annoy me.....
Kilroy, I appreciate you taking on the crud for me.... always important to try and keep the balance!
Dennis, I appreciate your help also..... sorry about the traffic woes and dry ribs.
Paul, that's one big pile of s*@&..... I mean manure.....Good that you have a place to take it to..... I still remember all the farm dumping the manure out on the fields along 313 just outside of Doylestown. Stunk up the whole area.....
Everyone have a great day!