Good morning!!!!

   / Good morning!!!! #132,021  
Ted, you and your wife are going to have a lot of fun with that greenhouse.
RNG, yes, thank you, that is my backup plan and I have a 50 and 100 foot 12G extension cords ready to go.

Showers have ended, time to get moving. Slowly.
 
   / Good morning!!!! #132,022  
I obviously missed something not too long ago and now can't find it. When did Ron quit posting and do you know what's happened to him? Or where is his last post?

I believe he gave a warning before about too much arguing in the GM thread.

Ron, hope you come back.

IMG_9397.JPG
 
   / Good morning!!!! #132,023  
If your generator has outlets on it, Drew, can you leave it disconnected from the transfer switch and run an extension cord inside to power your fridge and a fan while the electrician is working?


. Now if I could just get the old chuck off...
.

That was my exact thought for Drew as well. The generator would enjoy the exercise.

To remove the chuck, there is a LH thread screw down inside it holding it to the shaft, after you remove that chuck the short end of an Allen wrench in the jaws if it will still work. Then smack the long end with a hammer to break it loose. The chuck is RH thread. You can also use an Allen bit in an impact gun. Use the biggest bit that will fit in the chuck.
 
   / Good morning!!!! #132,024  
Good Sunday morning! 48 going to a rainy 54.
Nothing planned for today except a small get together for my MIL's 80th birthday.
Hope everyone stays safe and healthy!
 
   / Good morning!!!! #132,025  
if anyone else could comment on your church services being open or not, I'm collecting comments to present to
re-opening committee members.

that would be a real bummer if Ron was offended. This place isn't the same without him.
 
   / Good morning!!!! #132,026  
Roy, Buppies thanks.
Was looking at a big trailer place in PA. Trailer superstore .com Will have to check weight of ranger to decide 1 or 2 axle. Think I only paid $1600 for my new 7k 16 ft trailer, which still works fine but does need a tail light fixed, and new decking.
With my son moving again soon, I thought enclosed for double duty, moving and toy hauling. I really didn’t want one over 10 ft, but it seems 7ft wide start at 12 ft. 12 ft gives me some positioning room. Side door is a must.
 
   / Good morning!!!! #132,027  
Good morning
It’s 47 with a high in the low 60’s for today.
Rain is ending. Tempest says an inch, Davis says half that.

Today will be a shop day, two more speaker orders, got to get the one in progress out the door. Hopefully nothing breaks in the neighborhood, I’ve already got plenty to keep me busy.

I agree with Ron that it’s better to focus on what we have in common that what we disagree on. There are plenty of other venues for that. Hopefully he will be back.
 
   / Good morning!!!! #132,028  
if anyone else could comment on your church services being open or not, I'm collecting comments to present to
re-opening committee members.

that would be a real bummer if Ron was offended. This place isn't the same without him.

Not sure, but I think MD says 75% capacity. We spread chairs apart, and require masks. We are starting classes back up soon. Govt says 3 ft spacing for classrooms.

Likewise, use generator during the power outage.
 
   / Good morning!!!! #132,029  
Hi guys, sorry I haven’t been In touch. I’m back in the hospital and it is way too much to update right now. I’ll check in when I can. Have a good day.
 

Tractor & Equipment Auctions

2014 VOLVO VNM DAY CAB (A51222)
2014 VOLVO VNM DAY...
Kubota SVL65-2 Open Station Rubber Block Tread Skid Steer (A52128)
Kubota SVL65-2...
2022 FORD F-150 XL EXT CAB TRUCK (A51406)
2022 FORD F-150 XL...
1993 Ford Ranger STX Ext. Cab Pickup Truck (A50323)
1993 Ford Ranger...
2017 Ford F-550 Bucket Truck - 4x4, Powerstroke Diesel, Versalift VST47, 52FT Reach (A52128)
2017 Ford F-550...
2023 CATERPILLAR 299D3 SKID STEER (A51242)
2023 CATERPILLAR...
 
Top