Good morning!!!!

   / Good morning!!!! #119,831  
Good evening,
the temp is a cool 45°F and going down to 36. Wind ENE 8 mph. 60% chance of showers tonight and it is raining now.

That was an uneventful trip down to Markham.
The truck is totally stripped, all of my stuff is here at home with me.
The return trip was more entertaining, it appears as if a train derailed just south of Brechin, ON. Tied me up for 30 minutes and caused me a 20 mile detour on dirt roads. There are going to be quite a few peed off people going to the city from cottage country. The backup from Brechin stretched as far as I could see north of hwy 169, I left hwy 12 there and cut across country on 169 to hwy 11 north. A cop followed me onto the ramp for South River (I was 20 over the limit), that is $100.oo fine and three points. I turned west and he went east. Whew, another bullet dodged.


Stay safe everyone
 
   / Good morning!!!! #119,832  
Good evening. 48 now. Had a greT weather day, sunny and about 65. Started getting cloudy around 5, started raining and had a 15 degree temperature drop. Supposed to be pleasant rest of the week.

Got another trailer full of wood cut today. Had some logs down for over a year. The better half helped. She is pretty good using the smaller saw.

We took a break at one point, got a visit from the 2 turkeys, the geese, and some of the ducks. They had to see what we were doing.

Everyone stay safe out there
 
   / Good morning!!!! #119,833  
Took truck and Honda and got almost all of son’s stuff from apartment. Only a few kitchen pots and plates left. Basement is full with his couch, tv, stands, bed, etc.

I’m tired now.
Then wife wanted me to make camping reservations. Camping is a lot of work for me and I told her I wasn’t up to it with my GBS.
 
Last edited:
   / Good morning!!!! #119,834  
LS, maybe your son can do my trailer bearings next?
I have never checked them, but also rarely use the trailer and never taken it far.

You just missed him.... he was out at the Chesapeake Bay area a couple of years ago.... he might be interested in a road trip again....
 
   / Good morning!!!! #119,835  
It would take me that long to just clean and repack the bearings,
of course that's because I still hand pack bearings. I do have a grease gun tool that is
designed to pack bearings which I almost never use. If I'm going to be greasing a lot of bearings
"more then 6 or so" I will get it out of it's bag that it is stored in and grease all of the bearings,
then I will verify that they are completely greased by hand packing to make sure it flows through the bearing.
It is difficult to do a better job of greasing a bearing then hand packing when done carefully.

Yep, he hand packed them.... he said he "would never ever use one of those packers"... when I asked if I should get one! :D
 
   / Good morning!!!! #119,836  
I think I am going to drill and tap the trailer caps and install a zerk for greasing. At least they would get SOME grease!

The trailer is from 1997, mainly used to haul a 350gal water tank (Max payload loaded) at least 5-6 times a week, 14 miles round trip, for at least 6 years. I never regreased the hubs... always put it off "until next week". Then used it for hauling a bunch of materials / supplies for building the house.

Surprisingly, there actually was a little bit of grease left in the bearings!

I cannot come up with an excuse for not doing the maintenance on the trailer.... I am meticulous, to say the least, with maintenance on everything! ..... except the trailer..??
 
   / Good morning!!!! #119,837  
Good evening all. 60F for the start, overcast sky, windy. Breezy day, sky cleared off and high temp was 76F. Forecast rain did not happen :( . Overslept for Chapel so watch online, more fun in-person even with restrictions. Conserve energy day today, did not mess with gopher, but wait till tomorrow :devil: Made pancakes for lunch and napped and walk with wife. Did do some dog sitting, Scooter was on a power pout till stepdaughter came back for him :laughing:
Covid update: Cooke unchanged, Montague unchanged, Grayson unchanged.
Randy glad you had good visit with family
Drew weather sounds good.
Luther they say we are ahead for the year but very dry here now. No showers sneaking over Red river.
Ron thanks for the pic, what are those trees that were starting to turn?
Buppies I doubt you are senile :), hope work week goes well.
Thomas sorry about your snow forecast.
RS wow 83F that would put me to sleep! sounds like lot of TLC needed on blower.
PJ surprised you don't have the studio on UPS
Dennis love old railroad stuff.
RNG the air quality is really dogging you, sorry you did not get to see the mill, hope you get the alternator finished to your satisfaction
David hope you get tractor back soon, nice to see progress on project
Lou never had a bearing grease packer, always did them by hand, would repack 1 per year.
Randy had several guy in college whose family raced carts.
PJ great story.
Mike glad to hear front porch coming along, not familiar with regen, what happens to tractor?
Bill sounds s like quite the ordeal.
Rich good to hear all is going well.
Ted since not on boat trailer, grease will hang a little longer, but not for 6 years does sound out of character
prayers for all, especially Drew/move, Jay/Peg, Kyle's daughter, RNG/fires, and Country/president.
Stay safe and healthy you all.
 
Last edited:
   / Good morning!!!! #119,838  
Turned into somewhat laid back, relaxing day. Watched Brady win 🤙🤙. Piddled around a bit, grilled a couple of steaks.
Highlight of day was unexpected drop in by friends, even if socially distant. They were in neighborhood checking out some bee keeping at another neighbor, but they have one of Kalani’s pups. Schroeder is 10 yo and recently developed heart issues. Jim didn’t need much an excuse to check out Makani. Great to see them in person.
 
   / Good morning!!!! #119,839  
Mostly, I knew where I was going, but the other drivers on the road didn't have a clue and just got in the way.
People in these parts seem to only know one way to work/cottage/camp etc.
I take a different route every month in the Dodge just for the heck of it.
I have done it all my working life, when I had wheels.
 
Last edited:
   / Good morning!!!! #119,840  
2020-10-05, 0326

47 right now...high in the mid-60's

My back is a bit achy from yesterday's work....
 

Tractor & Equipment Auctions

Case Ih 1660 Combine (A50514)
Case Ih 1660...
Land Honor Portable Screener (A50514)
Land Honor...
2015 JCB 930 6,000LB 4x4 Rough Terrain Forklift (A50322)
2015 JCB 930...
2003 Ford F-650 Flatbed Truck, VIN # 3FDNW65243MB03484 (A48836)
2003 Ford F-650...
2017 Ford F-450 Crew Cab Mason Dump Truck (A50323)
2017 Ford F-450...
2011 John Deere 844K Articulated Wheel Loader (A50322)
2011 John Deere...
 
Top