5-Point sockets
- Thread starter BrentD
- Start date
- Views: 4130
mcfarmall
Veteran Member
- Joined
- Oct 1, 2015
- Messages
- 1,483
- Location
- Kalamazoo, MI
- Tractor
- Kubota M5660, Farmall C, JD 260 lawn tractor
The only 5 point socket I've seen is at McMaster Carr and it's for fire hydrants!
bullbreaker
Elite Member
Williams BB-526 Penta-Socket, 3/8" Drive, 51/64", 5-Point - - Amazon.com
oops wrong size .......
please accept my appoligy I'am installing kitchen fauchet and answering ques on TBN at the same time, not a good idea . Father time catching up with me I should know better ........
oops wrong size .......
please accept my appoligy I'am installing kitchen fauchet and answering ques on TBN at the same time, not a good idea . Father time catching up with me I should know better ........
Last edited:
AWSubie
Platinum Member
The 10 mm should work
Maybe try one of these?
https://images.homedepot-static.com...47/svn/gator-grip-sockets-etc120a-64_1000.jpg
https://images.homedepot-static.com...47/svn/gator-grip-sockets-etc120a-64_1000.jpg
Roadworthy
Elite Member
And since 25/64 is almost exactly ten millimeters that set should work for you.
airbiscuit
Super Member
- Joined
- Aug 28, 2004
- Messages
- 6,567
- Location
- NW Wisconsin
- Tractor
- New Holland T2310 (40hp), Kubota L3010 GST, New Holland TC21DA *** Previously - Farmall H, 1941 John Deere B, Shibaura SD1500, John Deere 850, Bobcat 642, New Holland 1925
25/64 = 0.390625
10mm = 0.393701 ,,,,,,,,,,, 3 thousands larger
10mm = 0.393701 ,,,,,,,,,,, 3 thousands larger
The 1715 uses a shibauru engine from japan, which is metric. The other posters are correct in thinking it's a 10mm, because it is.