need wiring schematic for my IH 284 diesel ignition switch

   / need wiring schematic for my IH 284 diesel ignition switch #1  

Gitche Gumee Kid

Bronze Member
Joined
Feb 26, 2013
Messages
67
Location
NW WI
Tractor
IH 284
Bought new ig switch. Thought I copied the wire color scheme but ended up with a solid red wire and ran out of terminals. This is a IH 284 diesel .
Any help for an 84yo that used to be a pretty good handyman wba.
GGK
 
   / need wiring schematic for my IH 284 diesel ignition switch
  • Thread Starter
#2  
Inter net search dosen't ,so far, reveal what I need---->color scheme for the six terminals on ig sw.
GGK
 
   / need wiring schematic for my IH 284 diesel ignition switch #4  
I looked through many of the wiring links that Alan W provided.

At most I see ignition switches with 5 terminals. Does yours have 6 terminals or is it that you have 6 wires and 5 terminals?

Many switches have more than one wire per terminal.

Can you follow your red wire to see where it originates from. I suspect it is either power to the ignition switch or a connection back to the charging system

How are the terminals on the back of your new switch marked or labelled?

Dave M7040
 
   / need wiring schematic for my IH 284 diesel ignition switch #5  
I did find this pic. Once again hope it helps.

IMG_3140.JPG
 
   / need wiring schematic for my IH 284 diesel ignition switch
  • Thread Starter
#6  
I looked through many of the wiring links that Alan W provided.

At most I see ignition switches with 5 terminals. Does yours have 6 terminals or is it that you have 6 wires and 5 terminals?

Many switches have more than one wire per terminal.

Can you follow your red wire to see where it originates from. I suspect it is either power to the ignition switch or a connection back to the charging system

How are the terminals on the back of your new switch marked or labelled?

Dave M7040

ig swt IH.jpgIH ignition switch.jpg

The new switch can be greatly viewed from ---->https://www.amazon.com/gp/product/B07Z7HZ8YM/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1
 
Last edited:
   / need wiring schematic for my IH 284 diesel ignition switch #7  
Did the old switch have more terminals than the new? If not then how was it ever connected.
At this point you are going to have to get a meter and or test lamp and start tracing the wires and see what they go to.
Then you can hook them up correctly.
 
   / need wiring schematic for my IH 284 diesel ignition switch
  • Thread Starter
#8  
I apprciate the input.

GGK
 

Tractor & Equipment Auctions

2003 FREIGHTLINER BUISNESS CLASS M2 SPREADER TRK (A54756)
2003 FREIGHTLINER...
2019 Doosan LCV6W Towable LED Light Tower (A51691)
2019 Doosan LCV6W...
2010 THOMPSON TRASH PUMP (A51406)
2010 THOMPSON...
2018 MDB T5E MDB DISC MOWER (A51247)
2018 MDB T5E MDB...
2015 Honda Accord Sedan (A55758)
2015 Honda Accord...
2022 Chevrolet Tahoe FL SUV (A55758)
2022 Chevrolet...
 
Top