Identify/replace drive rolls w/integral gears, Miller CP-200 MIG welder
- Thread starter the old grind
- Start date
- Views: 7659
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 13,627
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
Oh they know... it's just 'hard'.I guess the Miller folks didn稚 know how to covert decimal points into fractions.
View attachment 650621
OP
the old grind
Elite Member
- Joined
- Jul 21, 2012
- Messages
- 4,412
- Location
- Mid-Michigan
- Tractor
- NH T-1520 HST, NH TC33DA HST, Case DX26 HST, .Terramite T5C, . NH L785
Well I finally got pics. Thanks for the help and encouragement. The ham was OK, the creamed potatoes great as always, and I'll have to go back later for dessert. We got Gary going on CO2 and he was late for dinner, not wanting to put the MIG torch down. His feeder is a 10A and draws from the power unit's front panel 115v AC outlet.
I wonder if feeders on/for Pat's CP-300 are 24v DC and he sees that as a reason they wouldn't be plug & play to swap for a 115v. I say that's up to Neil and me to work around.
Anyway, I guess these pics will post only as thumbnails in the blue box while the site is still acting up in other peculiar ways. :laughing: Pat may have good news on Monday.
I wonder if feeders on/for Pat's CP-300 are 24v DC and he sees that as a reason they wouldn't be plug & play to swap for a 115v. I say that's up to Neil and me to work around.
Anyway, I guess these pics will post only as thumbnails in the blue box while the site is still acting up in other peculiar ways. :laughing: Pat may have good news on Monday.Attachments
Big Barn
Super Member
- Joined
- Aug 20, 2013
- Messages
- 6,874
- Location
- Victoria, B C
- Tractor
- More than 40 over the years. Ten at any one time. Mostly Ford and New Holland
Cool.
Does using this function eliminate having to use a grinder, jon...?
Does using this function eliminate having to use a grinder, jon...?
OP
the old grind
Elite Member
- Joined
- Jul 21, 2012
- Messages
- 4,412
- Location
- Mid-Michigan
- Tractor
- NH T-1520 HST, NH TC33DA HST, Case DX26 HST, .Terramite T5C, . NH L785
When Bigfoot lands his spaceship on the White House lawn, maybe.
I'm kind of counting on the guys to bring in more to grind than I can produce by myself.
The quality of my pics may allude to the steadiness of my hand(s) for such as .. well, welding.
"Make sparks, Boys." :cool2:
I'm kind of counting on the guys to bring in more to grind than I can produce by myself.
The quality of my pics may allude to the steadiness of my hand(s) for such as .. well, welding.
"Make sparks, Boys." :cool2:
radios1
Elite Member
did you look here for the 10a?. Manuals & Parts | MillerWelds the manuals and part numbers are there, I just saw them..
OP
the old grind
Elite Member
- Joined
- Jul 21, 2012
- Messages
- 4,412
- Location
- Mid-Michigan
- Tractor
- NH T-1520 HST, NH TC33DA HST, Case DX26 HST, .Terramite T5C, . NH L785
I did, thanks. What I found was an owners manual and a parts list with schematics by serial number. So, :cloud9: for a while at least.
Now I have part numbers for individual drive and idler wheels plus 'kit' numbers for both .030" and .035" wire. They get me nowhere online.