Tie Rod boot for DK40HSE

[Weeeee]

I have a 2014 DK40HSE that I pinched the tie rod guard and it tore the CV like boot. I found the part on Michgan Iron but they only the whole assembly for $123.66. Does anyone have a source for just the boot?

The pat number for the whole assembly is T4115-63612 ASSY,RACK END

 

[Coyote machine]

I need the same item for both sides of my DK-40se/hst. Burned them up tending burn piles. Have them temp wrapped with plastic bags filled with grease to keep the joints lubed...

 

[xcgreene]

I imagine you could buy just a boot with the correct dimensions from a place like this or similar

Ball Joint Boot and Tie Rod End Boot from Polyboots

 

[Weeeee]

I imagine you could buy just a boot with the correct dimensions from a place like this or similar

Ball Joint Boot and Tie Rod End Boot from Polyboots

Interesting site except it's in Bulgaria, looking for something in the US.

 

[xcgreene]

Interesting site except it's in Bulgaria, looking for something in the US.

You can buy their stuff through ebay here https://www.ebay.com/str/Polyboots

Im sure if you type in "custom CV boot" in the googles, some other options may pop up. I have just had luck with these guys, so long as you don't mind a week or two for shipping.

 

[Rebeldad1]

unless its some weird molded design you can get universal boots at most auto parts stores

 

[dirtwhisperer]

Any update on this.
My left boot also needs replaced