Interesting option Nik - remote data reporting at a minimum..... options allow remote control Start/Stop and Transfer ?
Rgds, D.
Not sure of all the potential features, but the tech did mention remote clearing of faults to allow a restart as well as more detailed status info. Currently you have to go to the control panel to clear a fault which may be set, for example, if the engine didn't start up quickly enough.
As a sysadmin for the past 2 decades I'm fully capable of getting that IT gear back online. But no way I'd want to be messing with that during or after an outage. You are relying on your ISP to have proper UPS & generator backups as well. Not to mention potential issues with the wires. Cell is a little better, but not by orders of magnitude.If you have power outages, chances are it played helll with your Internet access and LAN. Any control devices or schemes I intend to use during outages are far removed from IT. Hard wire, stand alone radio, or even copper phone line.
There must be something about IP devices that don't let them come back on line quickly and automatically after a power failure. That's the last stuff in the world, I want to be messing with in an emergency. It either works or it doesn't, you don't know what it's doing, you can't troubleshoot it, it's totally out of your control.
Unrelated. There is a rather interesting and informative (3 part) youtube video about a guy buying a $25.00 Portable
Generac Generator at Lowes.