Share Pics of People Hauling or Towing Something Wrong

[Sysop]

Lets fail some hydraulics!

No chains or ties unless hidden down inside the trailer. Every bump the front loader and backhoe buckets were bouncing about 8" or so.

 

[Creamer]

Lets fail some hydraulics!

No chains or ties unless hidden down inside the trailer. Every bump the front loader and backhoe buckets were bouncing about 8" or so.

That looks like a pretty smooth highway - bumps moving the buckets 8" or so? Maybe it was just the whole unit rolling back and forth. He's got it penned in!

 

[Sysop]

That looks like a pretty smooth highway - bumps moving the buckets 8" or so? Maybe it was just the whole unit rolling back and forth. He's got it penned in!

We had just came across a rough bridge and I saw them bounce. The front bucket actually seemed to flop some on the loader arms, which made it appear like a heck of a lot of bounce... The backhoe wasn't quite as bad.

 

[Snowback]

I love Home Depot!

This was still wrapped with plastic on the pallet, but not sure it's secured properly... Also - check out the tailgate and tell me what's keeping this from sliding back aside from those bungee straps.

 

[tjkubota93]

That bungee on the tailgate handle is classic!

 

[jlgurr]

Saw this in Kentucky today in northbound lane of I-75.




Sent from my iPhone 2.0 using TractorByNet

 

[prichard]

That bungee on the tailgate handle is f'ing classic!

Well if weren't for the bungee the tailgate would open and everything would fall out.

 

[dieselcrawler]

Saw this in Kentucky today in northbound lane of I-75.


View attachment 473650

Sent from my iPhone 2.0 using TractorByNet

I wanna see them unload that mess at the boat ramp...

 

[woody]

Lets fail some hydraulics!

No chains or ties unless hidden down inside the trailer. Every bump the front loader and backhoe buckets were bouncing about 8" or so.

I have a 14 foot dump and it has D rings in the bottom so they cannot be seen from the outside. I do put my backhoe bucket on the bottom of the trailer. what would be the problem with putting a 2" receiver under the gate and having a platform for the backhoe bucket to sit on since it would be easy to remove it would not be in the way when hauling gravel.

 

[dragoneggs]

Lets fail some hydraulics!

No chains or ties unless hidden down inside the trailer. Every bump the front loader and backhoe buckets were bouncing about 8" or so.

I can't see the tie downs if they are... But why is the bucket so high??? :confused3: