Loader lost float position

[RSF1952]

I have a 2004 Mahindra 2015 HST with FEL. I just noticed that that the float position has stopped working. At first
just the detent was lost and I could hold the joystick in the foward position to obtain float. Now I notice that even
holding the joystick foward the bucket maintains down pressure. It looks to me like the contoller is a Prince with
the end caps on the bottom. I am wondering if this is repairable, or is a new contoller needed. Any comments
will be greatly appreciated.

 

[davesl708]

Hi. welcome.

Most all control valves can be rebuilt fairly easily. At much lower cost than replacement. Barring damage to the control valve a rebuild kit should fix the problem.

 

[RSF1952]

Hi. welcome.

Most all control valves can be rebuilt fairly easily. At much lower cost than replacement. Barring damage to the control valve a rebuild kit should fix the problem.

Thanks for the reply. I guess the next question is , are rebuild kits available ?

 

[davesl708]

Either from the dealer or by manufacturer. Messick's is a good source.