Lets see your Mahindra!

[Sysop]

after he chopped it to bits, he scooped it up with the loader and was submitting it as a sacrifice to the gods of nature to bring about an early summer (we all know how that worked out....)

 

[tommcafee]

This is my 6010, just rolled 185 hrs today. No real issues to talk about at all, one leaking fitting on the coolant heater which I tightened, and on super hot muggy days if I run the AC for a long time I get a few drops of moisture in the cab.

 

[tommcafee]

This is my 6010, just rolled 185 hrs today. No real issues to talk about at all, one leaking fitting on the coolant heater which I tightened, and on super hot muggy days if I run the AC for a long time I get a few drops of moisture in the cab.

 

[RAMBUNCTIOUS]

^^ I had a coolant leak on the "heater block" ?!? also and I phoned Mahindra Houston and they mailed me parts. easy peasy.

 

[chvfrk98]

Nice! It's got a spoiler. Sporty!

 

[bulldog9]

Just turned 140 hrs - barely broken in!

 

[AchingBack]

As time goes by, I value this tractor more and more. 664 hours, thus far.

 

[dpb800]

Here is my 3616 the day we brought it home. Here it has the tiller after some repairs.

 

[bbbmgo]

These are pics of only a couple of the problems had with Mahindra. The 3016 I had was decent, only had to go to the shop a few times in the couple years I had it. My new 4010 has certainly out done that record and has been in the shop for a total of over a month in less than a year. I am certainly afraid to take this machine out of the barn. :thumbdown: Go Mahindra!!, well actually it doesn't go. :thumbdown:

 

[kneedeep]

Don't want to ruffle any feathers but that :number1: looks like broken from use and not necessarily a bad tractor!?!?

 

[morpheous71]

I would not recommend to do this at home.
Puts alot of stress on the loader and grapple.
Since then I have learned to be a little more cautious with the types of things I make my machine do...lol

 

[firehart2]

2810 HST

 

[morpheous71]

Deep in the woods. In her stealthy liar. Awaiting the new season.
Taking Dec. 2014 Northern Ontario.

 

[bindian]

View attachment 431031
I would not recommend to do this at home.
Puts alot of stress on the loader and grapple.
Since then I have learned to be a little more cautious with the types of things I make my machine do...lol

Then what are loaders good for? Mine lifts 3900 pounds. That's what I bought it for.
hugs, Brandi

 

[Slickheadhunter]

I haven't been able to put anything into my 6ft bucket that it wouldn't lift easily, including big rocks. Although I don't have a grapple so I'm limited.

 

[Nordman]

This is mine when i bought it.

 

[kneedeep]

View attachment 431080

That Mahindra has a John Deere Hemorrhoid!! :rotfl:

 

[mike69440]

View attachment 431031
I would not recommend to do this at home.
Puts alot of stress on the loader and grapple.
Since then I have learned to be a little more cautious with the types of things I make my machine do...lol

Grapples work well if you pick things up in the center of their center of gravity.

Been too busy with my Max28 lately to take any new pics. 33 hours on it this season.


I want to do a thread on the mods I've finished.

 

[daspiers]

New Toy (err New Tool)

 

[linuxman51]

new one should be here next week.