Road Warrior, I mean mirror.....

/ Road Warrior, I mean mirror..... #1  

JerryK

Elite Member
Joined
Feb 21, 2004
Messages
3,261
Location
Vanderbilt, Michigan, USeh?
Tractor
Mahindra (2011)5035 HST TLB & (2016)2555 HST Cab & (2017)1526 HST(2018)Cub Cadet Pro Z 154L (1991) Caterpillar E70B
Bought a 6" stainless convex trucker mirror on Ebay. Made a cheapo bracket from a 3/8" stainless rod with a couple stainless tabs welded on it.... Now, maybe, I can see those vehicles sneaking up on me as I motivate down the side of the road...
 
/ Road Warrior, I mean mirror..... #2  
Oh, I see now......... that way, you will see the 3016s who want to pass the 5035z :tractor::tractor:

:D
 
/ Road Warrior, I mean mirror..... #3  
Bought a 6" stainless convex trucker mirror on Ebay. Made a cheapo bracket from a 3/8" stainless rod with a couple stainless tabs welded on it.... Now, maybe, I can see those vehicles sneaking up on me as I motivate down the side of the road...

Looks good!
Does it vibrate much?
I hung a rectangular one from a homemade bracket to the cross bar on the front of my canopy.
Great position to be protected since I mow a lot near tree lines but it shakes too much to be clear unless I put a finger on the edge of it.
 
/ Road Warrior, I mean mirror.....
  • Thread Starter
#4  
Oh, I see now......... that way, you will see the 3016s who want to pass the 5035z :tractor::tractor:

:D

Us old folks don't drive too fast, especially scarry fast sitting on top of a tractor next to a ditch... :) I'd have to point it down some so I could see the top of your head though... [[ :) :) :) ]]
 
/ Road Warrior, I mean mirror.....
  • Thread Starter
#5  
Looks good!
Does it vibrate much?
I hung a rectangular one from a homemade bracket to the cross bar on the front of my canopy.
Great position to be protected since I mow a lot near tree lines but it shakes too much to be clear unless I put a finger on the edge of it.

It's a pretty heavy built mirror meant to be used on 18 wheelers and buses, so it shouldn't move much. Don't know about the mount vibrating... I have been busy putting sides on my 16' trailer to haul firewood, and watering a bunch of b&b trees I planted last spring. I have a few stumps I want to dig out, but waiting until it gets a little wetter so I can seed the mess I make. I'l let you know though.... !!
 
/ Road Warrior, I mean mirror.....
  • Thread Starter
#6  
Nope, no vibration yet..... still to take it on a road trip..but did lots of back and forth dumping dirt at the back of the property this afternoon... Now I have to break out the rake.
 

Marketplace Items

2020 JOHN DEERE 333G SKID STEER (A62129)
2020 JOHN DEERE...
2020 Globe Trailer GTDD30236 36ft. 75yd. T/A End Dump Trailer (A61568)
2020 Globe Trailer...
20FT X 30FT STEEL CARPORT (A58214)
20FT X 30FT STEEL...
2019 GENIE GS-1930 ELECTRIC SCISSOR LIFT (A62129)
2019 GENIE GS-1930...
Ditch Witch Parts and Excavator Bucket (A62177)
Ditch Witch Parts...
22" PIN-ON EXCAVATOR BUCKET W/PINS (A60429)
22" PIN-ON...
 
Top