Posthole Digger How do you attach PHD to your tractor?

[Redbug]

Never mind the post hole digger. Mantis...you need to do something about the shelves on your wall. Those oil containers are going to pull the shelves down. Lucky the drill press is there. A wall with shelves top to bottom is what you need. I noticed the neat lathe too and was wondering...you can do a lot with one of those...

 

[6thgpSF]

I built a holder from pieces of an old snapper mower ,parts from a weight bench,four tires and other items.I set it at the same height I take it off and only takes a few min. to put back on.when not needed I can put it any where I want. russ

 

[mantis]

Never mind the post hole digger. Mantis...you need to do something about the shelves on your wall. Those oil containers are going to pull the shelves down. Lucky the drill press is there. A wall with shelves top to bottom is what you need. I noticed the neat lathe too and was wondering...you can do a lot with one of those...

LOL!!!

Those shelves are a freak of nature... they have been that way for over 10 years, and have yet to fall. I leave them alone just to see how long they last.:confused2:

The lathe is around a 1913 South Bend. I was a member of a South Bend on-line group, and mine was the lowest serial number anyone had run across. I haven't done much with it. It was in a home machine shop, the owner died, and his kids were going to throw it away. I told them I'd be more than happy to take it off their hands. I used my engine hoist (multi-purpose tool!), loaded the lathe on my trailer, and brought it home. Totally free!:thumbsup:

 

[mjncad]

Mantis:

I've never seen a chandelier in a shop before.

 

[lewbest]

The lathe is around a 1913 South Bend. I was a member of a South Bend on-line group, and mine was the lowest serial number anyone had run across. I haven't done much with it. It was in a home machine shop, the owner died, and his kids were going to throw it away. I told them I'd be more than happy to take it off their hands. I used my engine hoist (multi-purpose tool!), loaded the lathe on my trailer, and brought it home. Totally free!:thumbsup:

GREAT find & certainly priced right! I have several old lathes; can come in quite handy at times.

Lew