John Deere 14TBALER 0.00 star(s) (0)

Information, reviews, photos, discussion topics, owner pages, and specifications about the John Deere 14TBALER.
Attachments

About the John Deere 14TBALER



John Deere 14TBALER Discussions (28)

Here are the most recent 14TBALER topics from our community.
  1. kelly johnson

    JD 14t baler

    Hello folks, I have a JD 14t baler that has been working fine over the years. I got it out this year and with the old twine it would bale and tie but the right side would break right after the...
  2. S

    John Deere 14T Baler Manual

    If the PDF doesn't work for you, go to the address below for the same manual online which also contains the manual for he version with the motor mounted on the hitch. John Deere 14T Baler Manual
  3. W

    JD 14t baler knotter issue

    Hi- I just joined the group and am trying to send a general call for help to anyone who might know how to install a knotter on a JD 14t baler. I bought this 14t baler 2 years ago and have baled...
  4. B

    JD 14T baler oil seal

    Have a new to me jd 14t Baler. The oil seal where the plunger crank shaft enters the transmission (for lack of a better word) is leaking. I posted earlier today looking for advice but for some...
  5. D

    14T baler knotting issue

    Hi, I have a 14T baler, with manual, and have some issues with one of the knots. The left one (if you are on the tractor) is quite often loose. When I use the modern plastic twine, 1 out of 3...
  6. G

    JD 14T baler with small tractor

    My neighbor down the road is looking to bale about a 200 bales from a small field using a 14T and his JD 1025R 25 HP small tractor. All flat land and dropped in field. I told him I had my doubts...
  7. W

    Help! John Deere 14T baler needles

    Looking for some help! The needles on my 14T broke the other day and was able to find a set from a tractor graveyard about an hour away from me. They were off of a 14T as well, and look great...
  8. H

    JD14T baler newbie needs guidance

    Hello all. I bought a JD 14T baler and have been getting acquainted with it slowly. The guy i bought it from got it from a neighbor who said it had been shredded for over 20 years. I figured...
  9. DaveOmak

    JD 14T Baler Knotter Timing.. Need some advice....

    Good morning..... This is my 14T baler.... I've had it for about 4 years and tweaking on it to keep it working very well..... Replacing parts as needed.... The knotters are last on my list due...
  10. J

    14T baler

    I am looking at a JD 14T baler. It is in good shape and is baling but the left knotter frame is cracked. Is this knotter frame interchangeable with any others from JD?
  11. A

    14T Baler Problems again....

    Got the baler out and figured that we would go without a problem and it won't tie a knot, the needles even lose the baling twine some how...we have just been running it through the cycle by hand...
  12. B

    JD 14t baler help :)

    I have a few questions on this baler. Hope someone can shed some light on this.. IN the pic. The pink circle is loose.. Questions is why? The blue circle has bolt missing? The red circle.. Are...
  13. donais

    214ws or 14t baler

    which one (if both work properly) would y'all get. same price when calculated for the exter gas to get the 214ws
  14. buffie

    14t baler timing (plunger crank position)

    ...we are still searching for an operators manual on this unit...soooo, can anyone talk me down on how to set the timing (are there timing marks anywhere ?) -- particularly: what position should...
  15. D

    14T baler (help ZZvyb6)

    Here's my problem: Knotter is not making a full revolution when tripped. The trip dog roller makes contact with the trip arm (to reset the roller) too early it seems so the cam on the knotter...
  16. D

    14T baler problem

    I've got a 14T that I haven't used in a few years. Got it out of the weeds, cleaned up, greased, checked timing etc. When I ran a cycle by hand the knotter didn't complete a full revolution...
  17. D

    Need shaft for 14t baler rear yoke snapped

    I am looking for a john deere 14t baler part (yoke rear) Parts number BP14507E email me at : dairythings@gmail.com our baler snapped this part and we cant seem tofind one that will fit the u...
  18. N

    Will a JD 40 Kicker Work on a 14T baler??

    I am new to the whole haying process and I am going to look at two differnet balers both suppost to be in good "field ready" condition, one is a Ford 530 baler and one is a JD14T baler. WHich is a...
  19. C

    John Deere 14T Baler Pitman Measurement Needed

    The pitman is "busted half in two", bent beyond measuring. I'm in search of a measurement of the pitman from the center of the wrist pin on the plungerhead end (there's a grease fitting at this...
  20. B

    John Deere 14T baler prob

    First off, I'm glad I found this site!! Secondly, go easy on me, I'm a gal!!! Anyway, the problem is, our baler will not tie one side..it ties the oneside every single time, but the other side...
View all John Deere 14TBALER Topics  
john deere 14t baler
[ad placeholder]

User Reviews (0)

Read what TractorByNet members think about the John Deere 14TBALER Subcompact Tractor
0.0 0.00 star(s)

Write a review >
View all 0 reviews
5
0 %
4
0 %
3
0 %
2
0 %
1
0 %
No results found.
Write a review >
[ad placeholder]

John Deere 14TBALER Owner Pages

View owner pages to see photos, customization and comments about member-owner John Deere 14TBALERs
No results found.

John Deere 14TBALER Community Rankings

#5 user rating of 61 Attachments items
#59 Viewed of 61 Attachments items
#2 discussed of 61 Attachments items
#2457 user rating of 19625 items overall
#10647 Viewed of 19625 items overall
#462 discussed of 19625 items overall
#12 Ranking of Most-OwnerPages in 19625 items overall
[ad placeholder] Item View sideBar

Highest Rated in This Category

Footer Links 1

Top