Hi everyone , I'm refurbing a l3300 it's fitted with an earlier front axle from a different model and I'm looking for the correct axle if anyone has anything please ? Many thanks
I plan to paint my entire tractor including the body, chassis, front loader and backhoe this spring and as I'm slowly getting closer and closer to the project I wanted to ask you what else should...
Guys,
I just picked up the Woods 7500 subframe backhoe and need some help installing it on my tractor. The manual only covers the 3pth installation but not the subframe. The backhoe is PTO...
Need help locating qty (2) rear R4 tires for my Kubota L3300. Dealer says 12.4 x 24 R4 tires to be used in rear with 10 x 16.5 R4 tires in front. Have found front tires and rims. Now need to...
Hello, I'm hoping somebody can steer me in the right direction. hahahee <whew> :o
I fired my L2900 GST up and took it about 10 feet when I realized I had no steering to the right. I still had...
Plan to try and repair the L3300 front axle leak on my 4x4 model tractor. Looks like lots of stuff on the web about this repair and seems like step 1 is to decide which of the 4 leak paths are...
After doing a lot of snow clearing and moving after a big deep snowstorm in March, I was unable to restart my L3301. Played with the HST pedal a bit and it started. Noticed the tractor was...
I am looking at a used 97 L3300gst tractor.
Are parts hard to come by?
Does the L3300 share parts with a newer model like the L3400?
I appreciate hearing from owners who have first hand info on...
Older Model Kubota L3300DT 4wd. Inherited . Motor mostly apart. Have the old parts. Cannot get PTO to disengage. Will go into gear and will roll in neutral . Prairieville, La. E-mail at...
I bought a Kubota 3 pt. hitch mounted backhoe for our 1998 L3300 a few years ago. I have removed and installed it 5 or 6 times and every time it takes between 45 min. and an hour for me to do so...
I've been meaning to get a battery for a long time. It turns over slowly and then usually starts. Lately I've had to jump start it. Today I jump started it and let it run for half an hour then...
First off, let me introduce myself here.
I'm getting ready to purchase a tractor for my new property and I have been looking quite heavily.
I have 15 acres with some wet areas so 4wd is a must...
New to me L3300 with 1400 hours.
Glow plugs didn't work when I bought it, waiting for parts on that but it has started fine including this morning with a little cranking. Ambient temperature range...
I'm wanting to replace the clutch on my L3300 kubota with loader looking for info on what i have to remove to get to transmisson bolts and is it best to leave loader attached to the engine.
Hi, I have a Kubota L3300 and the hydraulic system pressure seams to be surging. The 3-point oscillates with a heavy load and the pressure line to my front loader valve bounces at the same frequency.
All right guys, I need some advice. I was going to buy a new L3200 hst w/fel, but with the jerky 3 point and the money ( they gave me a very good price though at $17,300 w/tax) I am looking at...
I have a Kubota L3300 with front loader, industrial tires, rear blade, backhoe attachment and 500ish hours on the clock. I would like to sell this but not really sure how much to ask. Can anyone...
I'm looking at a Kubota L3300 FWA, diesel tractor, glide shift trans., 3 pt. PTO, Sims cab w/attached LA 480 hyd. loader, 362 orig. hrs. What would be a good price for this tractor?
I'm looking at purchasing a used Laurin cab off a 1998 L3300 to go on my L3710 HST. I contacted Laurin Cabs directly, and they would not tell me if it would physically fit my tractor, saying...
Yesterday I used my Kubota L3300 and when I shut it off it sounded like the ignition made a buzzing sound for a few seconds. Today I tried to start the tractor and it started to turn over and then...
I can not think of the name of these parts on the 3 point lift. I raised my box blade too high today and broke one of these. Does anyone know the right term for them and where I can find...
So im looking for a new tractor as i sold my Yanmar 155D today. Now i found a Kubota L3300 cabbed with a 8x8 trassmission. Now im wondering if these modles have any problems with them. The tractor...
I need a Service Manual for my L 3300. When I engage the 4 wheel drive front axles make a bumping grinding sound and does not pull in 4 wheel drive. Anyone have a similiar problem. The tractor has...
I see very manuals on line. I have an owner's manual that came with this tractor for general maintenacne. What do I guy that shows me more of the mechanical stuff. I'd like to change the axle...
I'm not sure if I have the correct terminolgy when reviewing the parts on the L3300 4x4 front axle. There is oil dripping down to the tire, and it appears to be originating where the axle ends is...
My 4x4 L3300 is about 15 years old. I'm not exactly sure of the year, but it's got about 700 hrs and front axles are leaking. They drip right near the wheel, and now must be leaking more as I've...
I've been reading and see issues with the L3300 pertaining to the top link bracket. It suggests that they should have a re-inforce bracket.
What would this mean and how do I know if I have it...
My l3300 gst I 1st noticed the clutch pedal was a little harder to push in . Thought something may just be sticking so I continued to use. Now the tractor will not move when under load and barely...
I bought a used Kubota MM belly mower today. I own a L3300 4x4 with FEL, and GST and mid pto. I dont see how in the world to attach the mower deck to anything under the tractor. Is there a...
I am trying to remove my three point hitch to install a subframe for a backhoe. The pins holding the lift arms to the tractor are impossible to remove. I don't think they have ever been removed...
I have a small hydraulic leak on my L3300 loader cylinder. I cant find the dipstick to check the hydraulic fluid. I see where the cap is buy theres nothing around it at all, just a cap where you...
I have read on this site about clam shell design grapples and other type grapples. I have narrowed my selection to either the 56 inch WR Long or 48 inch Millonzi Grapple. What is the main...
I need a grill for my kubota L3300. I need the complete asem.
The dealer wants $400 for this . anyone know of a salvage yard that might have these parts?
I've got a L3300 thats missing the whole grill asem..
the dealer wants about $400 for all the parts.
anybody know of any salvage yards that might have this?
Hi,
I have recently installed a FEL on my L3300 and now the 3PL is not working. I have a 3spool DINOIL valve for the FEL and connected the tank hose to the tank port on the hydraulic block as...
I've located a L3300 GST 4wd with 623hrs, it looks good but paint is faded, but tires look good. Dealer says "it just needs a battery". is this a good deal? a good tractor? doen't show any leaks...
I'm in northern Caiifornia. This weekend I'm going to look at a used Kubota L3300, no front loader or other implements, 1500 engine hours, listed for $5500 OBO. The owner says the machine was used...
Was mowing pasture on Saturday (pull type shredder) when I noticed my lift arms were down in spite of the control lever being up. Took off the inspection panel under the seat thinking the linkage...
This is my first post. Great to have others of same interest to communicate with. My used L3300 has a leak around the left rear axle and I assume it's the seal. I bought one and thought there was...
I have located a used L3300 with the following description:
KUBOTA L3300, 1790 hours, 4x4, ps, 32hp, shuttle trans, ind tires, loader. $12,500
There is no mention of the model year or the...
i have located a L3300 gst (1995) with approx. 300 hours and includes fel and loads of implements. could someone give me a rundown on this model and any potential problems to look for.
i wouuld...