Today, I purchased a CountyLine 3-point hitch log splitter from Tractor Supply (made by SpeeCo). The splitter utilizes the hydraulic system of the tractor. The problem is, the manual and...
Working with a friend last weekend and using his L2350. Hooked it up to a 3 point bale spear and tried to pick up a bale. Bale measured 4' by 5' diameter.
3 point would not get it off the...
Hi,
My wife and I just bought a 5 acre tract of land which we will be building on. We are in need of a sub-compact to perform clearing of field land (no tree removal) and light grading (after...
Hi, names Rob111, I have a 20 year old give or take L2350 with bucket that the 4 wheel drive went out on. still runs on rear wheels so I'm guessing it front. Anyone know of known problems I should...
I need to replace one of the cylinders that performs the bucket curl and I got a price from the dealer of $325 this morning. Is there a cheaper source of replacement cylinders?
Thanks.
Can anyone provide some help / infor to me regarding my recently purchased used L2350? Problem is: intermittent starting. I'm in Pennsylvania and it's below freezing out. Started fine day...
My Kubota L2350 lost all power steering @500 hrs. Turned it back and forth while going slow and regained some power. Tried turning all the way both ways to bleed any air and shutting off as per...
Hello
I"m new there so i Hope this is in the right spot ... what i got is my L2350 kabota ..when the temp drop's bellow 0 the front wheel's seem to freeze up?? it does it 2wd or 4wd it's like...
Hi folks-I'm looking at an L2350 w/580 hours with a front-loader, backhoe, brushhog and post hole digger for $10,500. Is this a good deal?
Also, looking at a B7100HD with front-loader, brush hog...
HAD A L2350 (about 1995 vintage) crack through the front end of the transmission - the dry part where the clutch/pressure plate lurks. A 4 whl drive with a front bucket. The bucket framework had...
Hey guys/gals, new member and (obviously) first time poster. Have followed the forum for a while, but just now ready to pull the trigger on a tractor. Can't afford new right now, so going the used...
I have got a 1999 873 Bobcat and am about done using it (clearing ground, moving dirt, gravel, brush, etc). I bought it to do these chores and then going to sell it. Well, I have a gentleman...
I just bought a used Kubota L2350 which needs a few things fixxed. I'm wondering if you guys can recommend a good source for a parts and service manual? I looked around the net already and found...
Today, I purchased a CountyLine 3-point hitch log splitter from Tractor Supply (made by SpeeCo). The splitter utilizes the hydraulic system of the tractor. The problem is, the manual and...
This is my first post and first potential tractor purchase. I need a bit of help deciding on which tractor to pick.
First I'll give you a bit of info about me... My wife and I just bought a...
I had trouble getting my tractor to indicate a fluid level using the sight glass on the side of the transmission housing. The fluid is 1" from the top and still not showing in the sight glass...
I am interested in looking at a used Kubota L2350 w/ 28hp, but I have a few questions for anyone who may be able to help. This my first experience with tractors so please bear with me.
First, is...
I just bought a lightly used L2350 with 500 hours to replace my B7100. I have put a couple hours on it and am very pleased with the purchase so far. I mowed a couple acres with my 60" Bush Hog...
Greetings. Somewhat of a newbie here, while I am on my second kubota, I am not terribly mechanically inclined, usually relying on others to do my equipment repairs and maintenance for me. I...
So I have resorted to researching this for myself after numerous dealers couldn't help us. We purchased an L2350 (1997) and a Danuser F7 auger with down pressure attachment a couple weeks ago with...
I'm trying to replace the original loader valve on the L2350 with the "Brand" (Brand is Manufacturer name) valve available from Motion Industries. The configuration will work with the float in the...
Hey guys, a newbie to the board here. I'm looking at a 1992 L2350 with 1200 hours. 84Q loader and manual 8/2 trans. Price is $6,500 seems to be in average condition for use and years...Thanks for...
Just bought a used Kubota L2350 and it needs new rear tires. My soil is sand and heavy clay. No serious AG work. Mostly using it for general chores, shredding and maybe some small food plot work...
Howdy. I have just started using a brush hog with my L2350 and I noticed a clicking noise when the PTO is winding down. It doesnt happen under power. If I turn the shaft with the pto engaged...
It's time to buy a boxblade for my next round of projects, virgin gravel driveway,trail grooming,leveling. L2350 is 25hp, 21pto hp. is a 5' too much?.
I have turfs w/chains 2-ladder, footprint is...
First post here. Been reading here for awhile but finally bought my first tractor. I bought a 1997 Kubota L2350DT 4x4 with a FEL. It has about 800 hours on it.
I'm planning to go through it...
Hello, just became member, trying to research solutions to problems I'm trying to resolve on a very abused Kubota tractor.
I'm 68 years old, live in rural south central Missouri and have 11 acres...
I want to add a front end loader (bucket) to my L2350 4x4 but have no idea where to even begin or how much it would cost. Of course I'd like to find a good used one but those seem hard to come by...
We have a l2350 which has worked real well for us.
Tractordata.com shows this model as having live pto, but from what I can tell on ours, it doesn't. When I let the clutch out with the pto...
I'm adding a aftermarket loader to a kubota l2350 the loader vavle has three lines. On the parts breakdown the return goes to the rearend/tank. But the other go to a block on the rearend ontop the...
Ive been worling on this L2350 kubota for some time.
It had hard starting probelms so i replaced injection pump,
injection nozzles,glow pugs.
Bleed in pump lines and now it spins over but wont...
New in here and hoping for a little help. bought an L2350 used and ran it for awhile, and i need to put a clutch in it. Never put one in a tractor but dont really see the problem. Was hoping...
I think I've narrowed my no start problem down to the starter. When I remove the starter and hook it up to battery charger on the bench, the solenoid will kick in with a 10 Amp source but the...
Where can I find a decent top link. I tried my Kubota dealer and it was nearly $200. I think this is too much, and will likely buy aftermarket.
I don't know what length that I need...
Got a L2350 (1996 year) see many people adding temp sender. They even show photos of the sending unit installed in the head plug, but no one say what part number they used that will fit on the...
Can't figure out how to get fel off machine. There are two arms available to hold up rear arms of fel, but can't figure out how they attach. And can I use the front bucket in a little down...
Hi - I presently have a Kubota L2350 with bucket loader, bush hog and 72" Woods finish mower.
I have about 60 acres and am feeling way underpowered especially in the bush hog area where the max...
Late 80's model L2350: Will fire and sputter, but wont stay running. I cracked the fuel filter and got flow out of it. (I will pick up a new one this week). What else could it be?
have a 'bota L2350 Diesel 4x4, with 650 hrs, turf tires and loader, runs, new front axle, average condition....just wanted idea of price range if i sold it
I have a Kubota L2350 DT (4x4) with power steering. I was pushing through some heavy brush and noticed oil coming from under the steering wheel and running down the steering column. Steering still...
Does anyone know the minimum collapsed and maximum extended lengths of the telescoping stabilizers on a B2910?
I have searched the site and found information on adding these to a B7610 w/ parts...
I have an L2350 Kubota tractor that I've owned for about 7 years.
A bit of important back-story:
Recently I replaced the battery. The new battery was the proper number of Amp-hours (actually...
I found a used L2350 with LA450S front end loader, York rake,
box blade, 51 hours, excellent asking price is 12,000.
wadda yall think??
How does it compare to the B2710 except for HST?
I would like to use this small tractor to build fence, maintain a 1200' gravel driveway, develop a Farmer's Market garden, and make some horse trails through south Texas mesquite. I expect to add...
I'm curious why I don't see more discussion on L 2350. I am considering one for my new 10 acres. 1995 mdl with la450 loader. 640 hours in excellent shape. I hav'nt purchase before so I don't...
I recently purchased a kubota L2350 with a LB400 loader. The loader works fine but the tractor does not have power steering or 4WD. I have a L2050 that has ps and 4WD. The frame and bolt holes all...
We are buying a home on 10 acres with some fairly steep hills. The current owner has used a '95 Kubota L2350DT for last several years, has 1400 hours on it. He has asked if we want to buy it.
It...
Today, I purchased a CountyLine 3-point hitch log splitter from Tractor Supply (made by SpeeCo). The splitter utilizes the hydraulic system of the tractor. The problem is, the manual and...
where do the support arms mount? I just acquired this tractor and it has a few problems! first I need to remove the LB400 loader, the 2 bolts in front have been removed, as well as the lower bolt...
front wheels not powered when in 4 wheel drive. does any one have brake down of gear box infront of transmission or know what i will find when o take this apart thanks tuttle
I have the opportunity to buy a 1996 L2350 with 484 hours. It is 4x4, not HST, and includes a Woods 155 FEL and Woods 7500 BH. Owner says a tree fell across the bucket causing some minor dents...
Have a question on my L2350. The clutch disengages the tractor, but it is difficult to change the gear selector ( like it is torqueing up).
Never have had any issues, 433 hours on tractor. Sits...
I have a BushHog 1846 qt loader, I have the opportunity to buy l2350 4wd at a reasonable price, will this loader work on this tractor, it was on a Yanmar YM1500 2wd. is there any where on the net...
L2350 gear-trans....Whoops. I thought I did all the maint. ,but missed one. The manual states there is a grease fitting on the clutch release ?. There is a steel cover on the right side of the...
The manual says it will do a 72" which actually suprised me I thought even a 60" might be the max. My new place is a overgrown field so i don't want to push the little tractors limits, does a...
I am considering a L2350, 500 hours 4wd with loader that is for sale locally, the asking price is $9500. It is supposed to be in excellent shape, but I haven't had time to go look at it yet. Any...
Finally got the parts to put my 4wheel drive shaft back in, the only real difficult part was getting the press pin out of the front wheel dive case, this pin keeps the cover for the shaft in...
I found a used L2350 with LA450S front end loader, York rake,
box blade, 51 hours, excellent asking price is 12,000.
wadda yall think??
How does it compare to the B2710 except for HST?
On my Kubota L2350DT tractor, my tach keeps pegging out. At very low RPM, the tach seems to be correct, but as soon as I increase speed to run the backhoe, the tach pegs out. Does anyone have an...
I don't want to step over the line here but in my playing on the web I found a L2350 w/ some toys for sale in central Texas for $7500. The website is...
I am looking to buy a L2350 2WD with no attachments. Do any of you guys know anything about them and how much do you think it is worth with 200 hrs and in good condition?
Thanks.....Jon S.
Mine is missing one. Looking for a replacement if anyone has one or ideas where I might find one (salvage???) Thanks.
Mark: 610-827-1386 / email: A6Aviator@msn.com
Told a friend about adding a remote to my Massey 135 and he asked if it could done to his L2350 4 wheel drive with FEL. He wants to use it to pull a rake for haying since that would not require...
just got back from an auction in west central ohio where a very clean L2350 with LB400 FEL (no mower) sold for 10900. it looked like new, had only 230 hours. was owned by an 83 year old man who...
I purchased sets of 7-16 and 9.5-24 ag on wheels to change the 13.6-16 and 24x8.50-14 turf on my L2350. The center hole and lug holes match on fronts (7-16) They are 6 on 6" with 4.5" center hole...
Have a L2350DT with Woods 59 mower. Lift arms will not go all the way down. I rebuilt the control valve with "O" rings.
It worked for a day. Now the mower is about 6" to 8" from from ground...
Question:
The manual for my tractor says it can accomodate a 72" rotary cutter. But it only has 20.5 pto hp. It DOES run my bush hog finishing mower 5' quite well.
Should i buy a 4 footer or a...
Does any one know if you have to replace both the hour meter and cable at the same time? My RPM gauge has started to act strangely and I believe that I need to replace it
Afternoon y'all! I've been using a Kubota L2350 for light farming work for several years now, great machine barely had any problems at all until recently.
I've got a hydraulic oil leak coming...
Ok... this is my first posting so hopefully i can get some help.. I have a Kubota L2350DT that has some major issues. First of all, I had problems with it starting, Rebuilt the starter to find out...
Can anyone give me advice on the reputation and loader work performance on the Kubota L2350 and or the New Holland 1720 tractors. Is 1100 hours 1996 asking for trouble as I fear?I am getting...
I have found a 1997 Kubota 2wd L2350 with turf tires and 1600 hours. Cosmetically, the paint is somewhat faded, but the body work looks very straight. The pictures show a tractor that is probably...
Where is a good place to buy ag tires for my tractor?
Has anyone put R4s on this tractor? What size would they need to be? I assume the rims will be replaced.
Thanks.
I've been offered a Great Bend 220 loader for my L2350 tractor, but can't find anything about it. No answer from GB so far. Does anyone know if this is a good fit and what sort of bracketry may...
Looking at a 1997 Kubota L2350DT with a Woods/Dual 155 Front End Loader.
From my other post, I've been looking at current models so am curious to know what the L2350DT now compares to in the...
I am looking for a good quality shop manual for my Kubota L2350DT. I have the original Operator's Manual and have saved it as a pdf file. I also have a parts manual saved as pdf and have purchased...