Wanting to know ,what oil to use in my transmission in my 2420 farm pro 2 wheel drive..

Does anyone know how to find a owner's manual for a 2005 farm pro 2420 2 WD

I have a farm pro 2420. When cold it steers ok but after an hour it doesn't work at all. Wheel just spin

My son just received a Farm Pro 2420 tractor. We were told it was a 2006 2425. I have searched the web for info on this tractor and can find nothing. You see the hood says its a Farm Pro 2420...

Hello from Nova Scotia. I am in search of a Y380 short block for my Farm Pro/Jinma tractor. The story behind my tractor, I got it from an estate sale. The person who owned it passed away and...

I've inherited my dad's Farmpro 2420. It's been a great little tractor for 5 years. I can pick up 1200lb 4x5 round bails with no issues with the 3pt. The only thing ive had to do to it is...

Bought the FarmPro 2420 manual, but wasn't very helpful. Can someone please help me by telling me where the oil port is located? Is it here in the picture? Thank you

My tractor appears to have lost both power steering and 3 pt. Checked fluids and screen filter and both are good. Any help diagnosing what needs fixed would be appreciated.

I have a Frampro 2420 that I keep popping the tires. The tractor was down for a while and a bunch of badly thorny locust trees grew in the field I mow. Now wheneverc I mow I ended up popping...

I hope somebody will give me a little direction or outside insight. Please! I have freshly rebuild this little tractor last summer. Everything new but the block. It was meticulously build to the...

2003 FarmPro 2420 with 1999 TY290 engine. Was overheating when it was purchased but I figured I could fix it. Flushed block numerous times, replaced radiator, hoses, fan, fan belt, water...

I bought this ol tractor a few months ago, the power Steering worked fine, the hydraulic fluid that was in it was black the filter was shot installed a new filter, I changed the hydraulic fluid...

I have a 2005 2420 Farm-Pro tractor with the Y-380 3cyl. Diesel engine and I have 3 manuals on the tractor but the only info on what Hydraulic oil just says 40 ? not sure how to understand that...

Need some guidance if people dont mind. I'm at the point with my tractor to replace tires. They look to be the original and they are just toast. My issue is front tire says 4-16. Well long story...

So reading through these forums I was able to diagnose a fuel issue last week and replaced sediment bowl etc. Tractor started up just fine this morning and have been working it for a couple hours...

Hello all, I'm new to the forum and new to the chinese tractor. I replaced 1 of my headlight bulbs and the tach stopped working. If I unplug it the tach will work again. Anyone know what my...

Is there anyone here who can tell me how to check the oil level in the engine injector pump? it is my understanding that the pump has its own oil and is not oiled by the engine. I have found the...

Guys, I bought this little tractor 3rd hand and it does what i need for the most part but the tach has never worked, I had to replaced the tach with a new one anyway because the original came...

Hey folks, this Farm Pro 2420 tractor was purchased second hand. Did not come with a manual or what so ever, I am trying to figure out the engine model so I can make some parts purchase. Can...

Hey all, I'm new here and new to Chinese tractor. I have a little Farm Pro 2420, recently the starter keep on spinning even when the key is at off position and the tractor is turned off. Has...

Greetings, I am changing the fluids in a Farm Pro 2420. I feel foolish for asking a simple question, but where does the oil go into? I have provided two pictures. The one with 2 arrow is the top...

Greetings, I posted about a farm pro 2420 that was on my property when I bought it and wasn't sure what to do. Hadn't been started in a long time and I don't know about diesels. Long story...

I got a Farmpro 2420 from my brothers estate, or that's what is says on the hood, when I look this model up is says 1.2L 2 cyl but this one has a (YT380L) 3 cylinder diesel. Someone said they...

Greetings, I recently purchased a property (6 acres) and in the barn was a Farm Pro 2420 (TY290) tractor, diesel with 189 hours. The property seller said that it hasn't ran in almost 4 years...

Neighbor passed away and his 1 owner Farm pro in good condition is coming up for sale soon, don't know alot about it other than he bought it new and used it with a 5 foot finish mower to mow his...

I just bought a 2420 and when you first start it it runs at around 500 rpms and won't rev beyond that for 3 to 4 minutes. Then it will take fuel and throttle up like it is should. As long as it is...

I have a faulty key switch and the one I purchased from the dealer does not look on the back like the one that is on the tractor. Does anyone know what these numbers on the back of the new switch...

I have a 2420 with the TY290 engine. It has always started right up even in the cold. Recently it had a tank of fuel mixed 50/50 with diesel and kerosene thanks to a friend. It was run about 2...

Got a farm pro 2420w/problems. When you put it in gear and give it throttle it takes a while to get rpms up. It acts like a old hit and miss engine.fuel filter and system is clean.Changed filter...

Hello folks I'm new to the site and have recently acquired a 2004 farm pro 2420 and have some problems. First,is it starts up and runs fine with no smoke at all of any kind and after about 30-45...

Hello everyone, Recently bought a Farm Pro 2420 (~300hrs) and have been dragging logs around as we clear some of our property. Yesterday, I pulled a small (6"x10') log 100' in 3rd low. When I...

Admins please move if in wrong section. I own a Homier Farm Pro 2420. I cut about 2 acres of grass with the little tractor and so far it's been trouble free. I want to change all the fluids since...

I just bought an oil pressure gauge and sending unit and a temp gauge and sending unit. Installed both, one at a time so that I would replace the wiring the same as it was. I even took pictures...

Where do I begin to repair the hydraulic lift. It leaks down. Sadly I can't keep my equipment up.

I am having problems with my rear lift it want stay up at all ! I have search on line par a repair manual but no luck:thumbsup:

I bought a used farmpro 20 horse 2 cylinder. What engine oil should I use to change the oil and filters for a fresh start in maintaining my "putt putt" as my wife calls it?

I have a Farm Pro 2420 Diesel Tractor and I am wondering if there is more than one place to add hydraulic fluid? Also, does anyone know how many quarts of oil it uses? Thank you.

I am in need of a small tractor and found a 2002 Farm Pro 2420 with 65 hours, it comes with rops w/canopy 5' King Cutter finish mower, 6' blade, Turf tires all the way around, set of tire chains...

Hello I bought a Farm Pro 2420 tractor and would like to get turf tires. I looked on the internet and they will hurt your feelings and not worth the money into a tractor I want to use with a...

I have a jinma 03 farmpro 2420 ty290 2wd and my 3 point hitch will not raise up .I tried turning the knob under the seat ,and had no results. Does anyone have any idea where to try next ? thanks

My 3 point hitch does not go up. does anyone have this problem or know why?

I have a chance to purchase a 2420 from a buddy who took it, and a Woods RM 600 finish mower on a trade for service. The 2420 has 275 hours on it, looks pristine in it's appearance and has turf...

Hi i have a farm pro 2420 there is a plate with holes in it in front of the radiator in it for summer - winter like the louvers on the old tractors it slides in and out thanks

It was running fine and parked about 2 months ago. Went to crank it up this past week end and nothing/wouldn't start. No clicking noise, just nothing. I knew the battery was old and needed...

hi there new to this I have a farm pro 2420 ty290 I come across this web looking up info on my tractor I like my farm pro 2420 got it from a friend I changed oil I put 15w40 in a new oil filter...

mine is gone and now it the time it has to be replaced. My question is it better to buy the whole clutch assembly or should I buy the components and rebuild the clutch pack? I can do some...

I sure could use some help, I have an older model Farm Pro 2420. Runs great, starts good, but here is the problem. No gauges work, replaced all fuses, checked all wires. Everything looks good. Now...

I just aquired a 2003 Farm Pro 2420 and was wondering if anyone could tell me a good source for buying parts?

The PTO on my Farmpro 2420 quit working. Fluid level is low, I think, but the poor excuse for a manual that I have doesn't even show if I'm checking the right thing. Does anyone have any...

The power lift on my tractor will slowly leak down after a few minutes.The fluid is good.I suppose there is a bad seal somewhere,the problem is I am not sure where to look and what part i am...

i know that this sound silly, but can someone let me know where is the oil dipstick is on a farmpro 2420?::laughing:

I really need some help, and so far everything i have found on the site is right on. My tractor starts off in high range and 1st gear just fine but after it gets warmmed up it will no pull over...

My belt broke today and it was shreaded does any know what lenght it is so i can go to a local auto parts and get one? thanks

Found a FarmPro 2420 for cheap - same as a Jinma 200, I think - 2wd. It has a few hundred hours on it - I was thinking of getting it to run a finish mower and possibly a 3pt snowblower. Any...

Hi my name is chuck and i just got me a used farm pro 2420. I don't know much abouth tractors since this is my first one. My question would be on how to hook up the hydraulic lines from a koyker...

HI i was cutting grass with my Farm Pro 2420 and finish mower when all of a sudden it reved up and wouldnt move, will not move in any gear and there is a slight grinding noise when clutch is...

Hello, I am looking for a 2420 steering gear box for my Farm Pro which is completely shot. Am interested in a used if it works and a new, just contact and let me know the price and where of...

Hi got one from a friend and we are having hydlaulic issues. The seal went out in the pump. He purchased a new one and put everything new in the tractor, bearing and pump. now the 3 pt will not...

What is this red lever for ? I have a FarmPro 2420

Hey guys, I have a chance to buy a 2004 farmpro 2420 diesel with 86 hrs and a 60" finish mower for $2000.00 I have about 3 acres to maintain and I already have a 4' boxscrape for light grading...

I have a Farmpro 2420, about 8 years old. I am replacing some of the electrical items, switches, lights, etc....Does anyone have an Electrical Diagram of the older style Farmpro with individual...

Hi I have a farm pro 2420 the has always run great. I put some new Fuel in it the other day and now it stalls out. It just chokes and stops. it all happens very fast. when you wait for a few mins...

Hi I own a 1999 Farm pro 2420 2wd front end loader tractor. I recently have had a starting problem with it. Whenever i turn the key to start it I get a loud grinding/clicking noise. I had the...

Hi i own a 1999 Farm Pro 2420 2wd front end loader tractor. I recently have had a problem with starting it. When I turn the key to start it i get a grinding/clicking noise. I charged the battery...

Need some help from the experts on this forum! I had a small hydraulic leak on my FarmPro 2420 and planned on fixing it as soon as I finished mowing the grass today. I pull a PTO-driven set of...

I have a 2006 Farm Pro 2420 that I bought on ebay. I don't have a local dealer that I know of here in southwest Michigan. I have 2 problems and 1 irritation. 1. It won't start now. It started...

i have friend that recently purchased a farmpro 2420. We are trying to replace the hydralic fliud and have no idea where to pour the new fluid in. We donlt have any manuals for the tractor and we...

Time to finally fix my little 2420. It's been languishing around for longer than I'd care to admit. Fairly certain it's the head gasket. Got water in oil. Found out I had leak somewhere behind the...

Hi new to the forum and thanks in advance for your feed back. I'am looking at buying a used ( 7 hrs) Farm Pro 2420. what should I expect to do to this tractor,since I do not know for sure what has...

I have a front end loader on my tractor and the brush hog works just fine when going up then lowering. My front end will not lower or actually do anything. I have added hydraulic fluid today and...

Ok here goes from a newbie to this site . I have a farm pro 2420 2 wheel drive . What I would like to do is setup a additional hydraulic line for lifting a disc. I have a 10 ft disc that I used...

Can anyone tell me which wires go where on the old type 3 wire voltage regulator? It has the ty290 engine.Thanks for any help

I have a farm pro 2420 4 wd that I bought . From day one I have had problems with the starter breaks and hydolic leaks. My dealer can't seem to repair it or get parts. I have called the...

I HAVE A FARM PRO 2420 AND IT WILL START UP AND RUN AT AN IDLE BUT WHEN U HOLD THE THROTTLE WIDE OPEN IT ACTS LIKE IT RUNS OUT OF GAS THEN IF YOU PUMP THE BLEEDER PUMP A COUPLE OF TIMES IT WILL...

Hey Guys, This Monday coming there is a local auction that I plan on attending and they have a Farm Pro 2420 on there, don't know the year, all I know is the picture I saw of it, looks like a...

I've got a 2005 Jinma 204 and I've got a hydraulic pump leak somewhere. My guess is it's where the "back" cover plate is. I've had leaks here before and "fixed" them by tightening up those 4...

We've got a 2420 with about 220 hrs on it. I did the 200 hr maint last fall and noticed over the winter and a couple times this spring that the machine would just stall out totally once in a...

I'm gonna have to replace the head gasket on my Farm Pro 2420 with the Jinma TY290 motor. I can't find any bolt torques for when I put the motor back together. Can any body help me out? Thanks...

Just a follow up on this since the other thread is closed, I replaced the alternator on the tractor finally. I ended up using a Delco 7127M-3 with a internal regulator that was not one wire...

I have been looking for a front tire 4.00-16 for my tractor and I can only find the sizes on either side of what I need. Either bigger or smaller. Havent called the dealer yet but I guess that...

Hi all I recently bought my first tractor a 2420 2wd farmpro. I have had a few minor issues with it but the dealer has done a great job getting the repairs done quick and getting me back on the...

Hi, First post here. We have a 126hr FarmPro (Jinma) 2420 with a charging problem and a hydraulic problem. Maybe someone can help us out. 1. Alternator not charging. Battery eventually goes...

I have their standard tractor which is about three years old. First of all I put a new battery on the tractor about two months ago and whatever the guy gave me at Oreilly Auto Parts must not be...

Just curious...I can't seem to find anything that matches my tractor. Whenever I look for my model I always get the 2 cylinder specs. I have a 3 cylinder. Is my 2420 really the 2010? Before...

FarmPro 2420 Newbie - Can\'t get above 500 RPM\'s I am a tractor newbie. Bought a barely used Farmpro 2420. One of the fuel hoses burst during Hurricane Wilma. I replaced the engine ran fine for...

I finally got around to using my new tractor today. I went around and made sure everything was tight, all the places that needed fluids had it (it's nice that they painted all the fluid...

Can anyone tell me what the maximum tilt ange for the FP2420 2 wheel drive with front and wheel weights is? Thanks in advance for your help. Dave

Is this 2 wheel drive tractor strong enough to be equipped with a 6 foot rear finish mower?

According to the manual, the adjustment for increasing or decreasing the rate the lift goes down is to loosen the screw under the big knob under the seat and turn the big knob to adjust the rate...

OK I bought a Farm Pro 2420 at a Homier Road Show, never owned or used a tractor period. When you stop laughing, if you have the time, please answer a couple hundred questions. I plan to start a...

I am thinking of buying a FP 20 HP tractor, I have looked at them at the Homier Shows and at dealers. One question I have (among many) is does the gear shifting ever loosen up. The tractors I...

CAN\'T DECIDE: FARM PRO 2420 and IMPLEMENTS Hey ya'll, I am in southern Louisiana and want to buy a tractor and a couple implements. I was just wondering if the Farm Pro 2420 is right for...

I've never owned a tractor before...I've used a John Deere 160 for the last several years to mow 3 acres. I've acquired some additional land and in the immediate future I'll want to finish mow...

I purchased a Farm Pro 2420 Tractor w/front loader, The manual is mostly Chinese. I had steering problem,so i called the dealer. he sent out his mechanic. he couldn't figure it out. latter it...

I have a co worker that's looking for a tractor . He doesn't want to spend a great deal of money on one . He's looking for a reliable machine to do brush hog work and clean out the stalls in his...