My kubota b7510 will not start. In the fuse box the middle fuse 10 amp. Will blow when i try to start it. Have check all the wires that are expoesd now unsure what to do next?

I went out to start my B7510 and there was no power. Turned the switch on and heard a slight buzzing sound sort of what it makes when your battery has gone bad. After that nothing. No lights...

I need to cut off and weld on new ball joints on the drag link for my 2004 Kubota B7510HSD. The drag link is the rod that goes from the steering gear box to the knuckle arm. Does anyone know...

Hey there, hoping someone can help me out. I bought and downloaded the workshop service manual for the B7510 online but it doesn稚 have the wiring diagram with colors. Looking if someone has or...

New to the forum. I'm looking at a used 2007 B7510 and trying to get an idea of what is a fair price to pay for it. It is in very good condition. It does not have a loader and has about 600 hours...

so I've just joined this website in an effort to get the right info so I can properly change the transmission oil in my B7510. I've done a ton of reading online. My manual and website info says...

We have a B7510 that suddenly stopped moving during use. It will not go forwards or backwards. It makes no noise whatsoever when depressing the HST pedal. All linkages are intact and operational...

I replaced the lift pump but still do not get fuel from the output side of the new pump. I am getting fuel to the input side of pump. Any help would be appreciated. Richard

Coming up to 600 hours on my Kubota B7510 which runs a 5' belly mower and a 4' bush hog. When I changed the oil and filters at 300 hours there was no evidence whatever of anything but pristine...

Can anyone tell me where I can find how much my tractor is worth? It's a B7510 with a LA302 front loader and a 4672B backhoe, it has 188 hrs on it. 2007 stored inside most of it's life.

Just brought home a new (to me) Kubota B7510. Realizing now that mine does not have a foldable ROP loop and also that it will not fit in the shed I want to keep it in. I'm not able to find much...

I am wondering if anyone has used a B2781A 51inch front mount blower on a B7510HSD machine. I have had the Bx2750 blower for the past 8 years and it needs to be retired. I clear a driveway about...

I recently put a couple of tanks through the Kubota B7510 trimming around 15,000 tree seedlings with the 48" Braber rotary cutter. As long as the grass wasn't too long it did a good job. When I...

I just finished changing the hydraulic oil in the Kubota B7510. It's quite a job. I'm told HST machines live or die on the condition of their oil, so it needs doing every 300 hours. The...

I've noticed a few older posts on L series Kubotas with front axle leaks but nothing on a B7510. I'm looking for advice on changing the seals. The front axle seems to be leaking from the top of...

Does anyone have experience matching a snowblower to a Kubota b7510? I may buy a used blower or cut a bigger one (72 inches) I have down to an appropriate size. The manual isn't really clear on...

I bought a one bottom plow from TSC and cannot get it to work. I cannot convince it to roll the sod over. It rises up, leans over and falls back in the furrow. I have adjusted my lifting bar up...

Can't start this thing it is a great tractor but have been having trouble starting it with key. I turn the key to glow plug, it sets, turn to start position and nothing. Battery is up but no...

I like to know if anyone has any instructions or diagrams on replacing a water pump on a Kubota B7510HSD. What do you have to remove and how and any torque on bolts required.

After 15 hours of mowing our rather rocky green space, the blades on the mid-mount mower of the Kubota B7510 I recently brought home need service. The centre blade came loose yesterday and I was...

Hello All, I'm a proud new owner of a Kubota B7510. I purchased this tractor second hand. It's the first Tractor, first diesel, first hydraulic piece of equipment i have ever owned. So i will...

I have had my backhoe for a couple of years. This thing is hard to store and even harder to move around the shop. I finally decided to build myself a dolly, with a few requirements in mind. The...

WHERE CAN I GET A SHOP REPAIR MANUAL OR A WIRING SCHMATIC FOR THIS MODEL KUBOTA

I am in the market for a tiller for my Kubota B7510 and was looking for suggestions and or advice. I was hoping someone has the same tractor and can give some first hand experience on a tiller...

I need more down pressure on the Land Pride PD10. They make a down pressure kit for it. Anybody know if I have to also install an additional valve to actuate the down pressure cylinder on a...

Looking for wiring how to for additional lights on my Kubota B7510 ! Any diagrams ,etc would be helpful!

looking for free download of owners manual for Kubota B7510 , also service manual. Knothole29@hotmail.com

When I bought this tractor, I never thought I'd need more than a bucket. How I can now see the error of my ways. I would love to have a set of pallet forks, bucket and something I can use to move...

Bought my first tractor, B7510 two mos ago, Wylie, TX (near Dallas) still looking for backhoe....any help locating one or advice will be greatly appreciated.. tractor still at dealer (Roberts...

Just bought a 2008 B7510 and this original factory set leaves much to be desired.It slants forward and is just basically uncomfortable. Does anyone know where to get a replacement besides paying $...

I have looked and looked but I cannot find the exact location of the rear drain plug or oil strainer for the hydraulic UDT fluid (I have searched the web and my tractor). I have found all kinds...

My B7510 does real well around the yard with the R4 tires, but I need R1s for disc and other field work (I can't even pull a medium heavy trailer uphill if there is any green or moisture). I tried...

Can anyone tell me where to get a free parts manual or if you have one can you send it to me. Can not stand paying $$ for a pdf manual. Someone must have one already. Thanks.

I went to look at two used tractors today. Both 4wd with loader. I liked the MF but am concerned with the ground clearance. It seems kinda low. It has turf tires on it, I am trying to find out if...

I am looking at used RCB54-24B Mid Mount Mower decks for my B7510HST tractor. I've never seen one and would like to know how it mounts so that I'm sure it has the right brackets. Does anyone have...

I am in the market for a FEL for my 2004 B7510 and have checked Craigslist for about a 500 mile radius and have found nothing! :( so I called some dealers and got prices on a new loader, Help me...

What are the pros/cons between these 2 tractors. Both have similar power & hst and 60" mowers. What are the noticeable differences? Tires are bigger on 7510.

I have a 7510 that had the same noise as described on your forum. Transmission noise under no load. Noise leaves when tractor is pulling. The fix is very simple. The dust cover surrounding...

Purchased a used RCK60-24b to mount on my B7510HSD and I'm having trouble with the mid hanger on the left hand side rubbing a hose. Please see the picture, I'm not sure what that hose is for but...

After two years of owning my B7510 I was finally forced to leave it outside my garage. A small tear in the seat got larger in the cold weather and now I have to replace (Yup, I forgot to fold the...

Price check for a kabota b 7510 hst?

I have a new (to me) Kubota B7510 with a FEL and am using mostly to haul firewood, rocks and moving some dirt. I live in the mountains of NC and, while I have established tractor paths with safe...

Admittedly, I am a novice..... I want to make sure I know where the engine oil drain plug is. The Owners manual is not clear to me. One post I read made it seem like it was inside the oil...

Looking at used. I don't see alot of difference other than BX2200 newer model. Equiped with FEL and brush hog or box blade around $10,000--little less. Would kindof like to have mmm but don't seem...

Tractor wouldn't start, let it set a day and it started. Started fine for 3 weeks. Now, for the last two weeks I can't get it to start. Crossed selanoid, and checked all 5 safety switches. Haven't...

Just want to let folks know a situation I ran into with my tractor. Nothing bad just a heads up if you have a B7510. Ever sine I had my B7510 I noticed that the power was not that great when...

I just saw this Kubota tread - Anyone have a recommendation for a tiller to fit the PTO on a B7510? Place to purchase and price?

Anyone have a recommendation for a tiller to fit the PTO on a Kubota B7510? Any idea on price and place to purchase?

For sometime, my 5 yr old B7510 HST would continue to move slowly forward when pressure was taken off of the pedal, and often would have to tap the reverse pedal to stop it. Sometimes, the tractor...

Hi all, I have been surfing the site for over a year now and have owned my B7510 for about a year. New to tractors, but I feel with all the information I have received from this site that I have...

Anyone know the bolt size for the Kubota B7510 seat? After my first seat got replaced in 2006 with one from Tracotrrs Supply, I recently ordered the new upgraded seat from Messicks and I dont...

I'm trying to decide between these tractors. I have a little under 2 acres about half of which I will mow and the other half is wooded with large trees (some of which I may try to establish and...

This morning I started my tractor and it was making a whinning noise. The sound goes away as soon as I push in the clutch pedal. It sounds like a bad throw-out bearing??? Is there one on a HST...

Hello everybody, first post. I found this site while looking at ar15.com asking about this tractor. Anyway, my wife and I just purchased our first house in the country. We are looking to...

Just came across this Bend, Oregon Craigslist post and it doesn't sound like too bad a deal if you happen to be located within reasonable distance of Bend. Anyway, here is the ad. 2006 KUBOTA...

Looking for a tiller for general use. The B7510 has 16 pto hp...looking at CCM CR50 or the MR130, like the fact the MR130 is much heavier...but it requires 15 hp the drive, Both are the same...

I started looking for a set of chains for my 7510 rear tires (TURF TIRES). I have been looking for an excuse to get chains and now it came up. I will do some logging pretty soon and want chains...

Hi all, I just purchased a Kubota B7510 with R4 tires and a rear-mount field mower. I purchased the mower for my field, but my backyard had a growth spurt and had to be mowed with the tractor...

I thought it would be nice to plow with my B7510 HST Kubota so I built a subframe and plow last month. I started with an old meyer 7 foot blade. I cut it down to 5 foot and re-skinned the bottom...

I am looking for a plow attachment for the FEL of my Kubota. I have heard of a company called Guest Industries out of CT, but I was hoping to find used, as I want to save $$. Anyone know of...

I'm wanting to sell a 2004 B7510hsd 4x4 with fel with 430 hrs. and don't know what to ask for it, so maybe you guys could help me with a figure. I also have ten implements: Taylor-Way tiller 48"...

Was wondering what I would expect to pay for a B7510HSD w/foldable rops, kubota fel and bh? Just a ballpark figure. I live in northeast PA and have access to 3 quality dealers. Looking at the B...

I have a kubota 21 hp B7510HST and have questions about putting a 3pt backhoe on it. Will it work without a subframe or will it twist everything? If it needs a subframe, about how much is...

I am wanting to do my own 50 hr service. I know that the oil and oil filter and the hydrolic oil and filter need to be changed and grease points, but not sure about any other stuff. Also what kind...

I have a 7510HSD (love the tractor) but it causes severe radio interference to AM radio stations if the radio is in close proximity to the tractor. The interference does not occur at idle, but at...

Just traded in the BX2200 for a B7510 HST and was looking for the site that will give you a copy of the tractor parts listing and numbers in PDF a format. I got the PDF for my BX2200 a while back...

sadly, i have put my b7510 up for sale. it is in the classifieds.

My father-in-law borrowed my B7610 to move a huge pile of dirt he had left from geting his drive paved. Now he wants one. He has a couple of old Cub Cadet garden tractors, an old Dixie Chopper...

I am considering trading my BX1800 for either a B7510 or B7610. I need a machine with a little more ground clearance and capability. The difference between the B7510 and B7610 is about 3 Hp and...

I got my new 7510 yesterday, along with the FEL, 48" Rotary Cutter, Box Blade and Landscape Rake! Dealer even threw in some Ball Caps! I spent a couple of hours playing..errr....working last...

1) I have read that some implement attachments operate better using the float position on the 3point. However it seems that the B7510HST does not have one. Can anyone with this tractor tell me...

I have a friend who has offered me the use of a PTO driven post hole digger. My tractor is a 21HP B7510HST with a PTO of 16HP. Is there anything special about phd's that would limit my use of...

Things do happen fast. I thought I was going up hill but the hill has a compound slant. My front wheel went into a hole I couldn't see and before I could react, over I went. It actually wasn't...

I've been looking hard at tractors for the past few months. The <CEO> may/may not finally let me pull the trigger in the next couple of months based mostly on the prices I can come up with versus...

Hello all - I am a new owner of a B7510. I had a local guy over to do the 50 hr service and I noticed the Super UDT fluid level as indicated by the yellow dipstick seems to be way over the high...

What if anything are you doing to carry tools? There's no room behind the seat and the little one under the seat is good for about a screwdriver and a adjustable wrench. I was thinking that I...

\'04 Kubota B7510 Considering up grading to a bigger tractor and need to sell mine first. 2004 B7510HST with 302 fel (316 hrs) also have a box & grader blade, Taylorway Pittsburg tiller, and...

My B7510 Turf Special and it\'s property... 16 hours on her so far!

I am looking to upgrade my BX2200, so I am wondering if you folks have any thoughts on pricing on the B7510HST w/loader? I have not tried talked to the dealer yet. Here is what I am thinking...

Both have FEL and 60" MMM, HST. My local dealer quoted $13900 on the BX2350 and $15850 on the B7510. I went in with the idea of the BX but he steered me toward the B. Any thoughts on the price...

Just droppin in to say hey. Picked up a "last on the lot" B7510 Turf Special today. Cut 3+/- acres in about 2.25 hours without a glitch at all. Nice to know there is a message board for tractor...

I’ve read a few posts on TBN that said the limiting factor on the larger B2710/2910 and MMM was the deck belt...they said it would squeal before the engine lugged down in tall wet grass implying...

Guys, My B7510 HST turned over 50 hours this evening while I was grading an area around our new pool. I would like to perform the 50 hour service myself and was hoping that I could get a parts...

I've reached the 50-hour service point and changed the oil in my B7510HST which I've had since last June. Filled up with Rotella 15W40 oil rated for diesel use. Couldn't find any diesel-rated...

Hi, I am new to this forum, but have read some of your discussions so I decided to join. I have a Kubota B7510HSD. And this is the first real tractor I have owned. I am wondering if anyone can...

I have the opportunity to buy a Kubota B7510 with a 60 inch mowing deck and a front end loader. With 135 hours on it. Not sure of the year, or how the tires are, but they are asking $13,000 for...

buykubota-ML-797914-ML- Brand specific. Moved to Kubota Buying/Pricing forum.

Okay, I have been driving myself nuts with this for a month now. So far, bought an L2800 gear and cancelled as a single stage clutch and pretty bad for mowing. Emailed Kubota and they are...

Normangee Tractor in Normangee, TX has quoted me $11,200 for a B7510 4WD gear shift tractor with FEL. Is this in line with the market? I want a PHD (post hole digger) to go with it and the quote...

I am a newbie to the world of tractors and am in need of some advise. From what I have read, this is the right place to be! I have 10 acres, 4 of which I have been mowing with a cub cadet riding...

I'm a relative newbie to the tractor world, other than toying with the idea of getting one for a couple years, and having a little experience operating FELs and BHs. It's time to make the move...

I'm having a devil of a time getting Kubota dealers to give me a price, but the one I have gotten for B7510HST with 60" MMM is $10,575. That's an up-front number , so I assume it could go lower...

Anyone out there have any experience, opinions, recommendations, etc. about using a hydraulic post hole digger, like the Land Pride HD25, bucket-mounted on my tractor for downforce in pretty hard...

My wife and I are in the process of buying an 8 acre farmette in West Virginia. Half of the property is grass and half woods. I have been reading through this forum for a few weeks and between...

Thanks to the members here I finally decided on a Kubota B7510 (after taking a couple years to convince my better half) and had one delivered on friday with a 302 loader and Bush Hog SQ480 rotary...

Hello, New to TBN, i live in upstate NY, 1 hour north of Albany. Looking to purchase a b7510, with a fel, and a mmm. I visited Salem Farm Supply, and was given a price of $14,200. Does this...

Anybody bought one? Or seen one? I went from a B7500 last year to a B7510, and at that time considered going from the 60 MMM (ground contact) to the 54" MMM (suspended). The dealer talked me...

Hi all, just received a new 7510 on Friday. After 3 hours backhoe & loader mixed operation the main boom on backhow started to "stutter" a little and I found I had a hydraulic fluid leak where the...

I am have been reading TBN for about 6 months and have gotten a lot of good info. I was looking at buying a tractor in the next 3 months. I started shopping on the net and was looking at all...

Please help me with my choice between these two tractors? The JD has 2 horsepower more, but cost C$4000 more with the same size tiller,mmm and FEL. Will be used for mowing, some ground work...

I was looking to buy a small Kubota BX 23 or a B7510 and THEN... I saw the Kioti web site and now I am interested in a Kioti. Did any of you look into either Kubota the buy a Kioti, and if so...

Very new to the site and the tractor world, I have been looking at few the last couple of months and have a few questions.. I will be mowing about 6 acres of grass in VA and have been looking...

I was set on getting a B7510, but I was speaking to a dealer and he recommended geting an L series tractor. He said they are bigger tractors and true category 1. I was under the impression the...

Hi All, I grew up with tractors and currently own several with regular manual transmissions. Am now looking at the B7510 or B7610 for light utility work including some linear mowing (along...

Question 1: B7510HAD 5 months old, 175 hours. LA302 Loader, Bradco Backhoe, R4 Tires. $14k. OK? Question 2: Best source for B7510 parts? Question 3: Best manual? Source? <font color="blue">...

I was about to purchase the B 7510 and the JD dealer called. Here is the deal. B7510 with 302 FEL, 60in mmm and 48in box blade for 15422 including taxes at around 735 dollars. JD offered the 4110...

5\' King Kutter Box Blade for Kubota B7510? I am in the market for a box blade for my B7510 and need to know if a 5' would be to large. Kubota recommends the 4' box blade, but I want to get...

Please give me some guidance for purchasing a CUT. My options are Kubota B7510HSD vs. Kioti CK20HST. I have only test drove the Kioti and it seemed to fit my needs and the looks are pretty...

Does anyone know where i can get wheel weights for the 7510. I checked a website called ezweights but think they are no longer in buisness(Never reponded to my email). I would like wheel weights...

Just got a quote: B7510 w/ -FEL -BH-13" bucket (Bushhog brand) -4' bush hog (not sure what brand) -4' box blade (not sure what brand) -5' RMM (Land Pride) -16'...

Looking for opinons & advice on 3 PT. tillers that you own/ have used for this tractor Kubota B7510 All opinons welcome!! (but would really like to see testimonials good/bad from your personal...

implement-ML-551108-ML- Moved to the Attachments forum.

What is the biggest brush cutter I can operate with this tractor?

Hi, I've been reading and learning all about the kubota compacts on this forum for the past several months. As a newbie I knew nothing. I've learned enough to be dangerous and now I'm ready to...

Any one have info/experience with log splitters mounted on A B7510 tractor? (or any other) 1. Kind 2. Make etc. 3. Recommendations! Thank you, Dean

I just wanted to thank all of you who have contributed your experience and expertise to my purchase today of the following: B7510HST 302FEL 4672ABH W/sub frame 12"Bucket Folding ROPS R4 tires...

Hello. I have been reading on this site for a while now. Been looking at many tractors trying to properly "size" my new toy for my needs. The local dealer had many BXs in stock but no B series at...

I sat on a B7510 seat yesterday and it sure beats the pants off the one I have... well my B7500 seat beats my pants compared to the new seat! The B7510, or what appears to be all of the new...

trying to make the decision between both of these tractors. The kubota was quoted at $12400 with loader while the 4110 was quoted at 14300 with loader. Am i missing something. Whats the...

I am thinking about buying a new tractor I have narrowed my choice down to a Kubota B7510 or B7610 I have priced them with my local dealer. Both tractors would come with a 60" mmm and a 302...

Came in on Friday. Unfortunately, I'm also building a house up there, so only got to put two hours on the beast. Great machine, easy to operate, and very fun, too.

Yup, it's being delivered in the morning. Just so happens that I also scheduled delivery of 12 yards of road gravel to play around with this weekend. The tractor, FEL, 60MMM and 5' rear blade is...

\'57 Ford died, NEW B7510 coming soon Nice board, lots of great info. About a week ago my Ford 600 threw a rod bearing, so I was left with the choice of rebuilding it, possible $2500, or...

Hi, I have been lurking here for months learning as much as possible and I finally bought a B7510 (pic attached). She arrived last Thursday and came equiped with filled tires, chains on the rear...