This 801 lift does not work at all... Have substituted a working pump, rebuilt the cover, adjusted linkage- absolutely nothing. Fluid comes out of the pump plug when running.If the pump is removed...

I've got her running right - idling at 475 and no longer bogging down above 1800. Turns out all she needed was a clean fuel line and new gaskets. While I had the carb apart I replaced anything...

Gold Demonstrator??? In Oklahoma, $1200, needs some 'putting together'. dallas.craigslist.org/dal/grd/d/pauls-valley-ford-tractor/6902874953.html

Does anyone on here know where I can find wheel weights for the front of my Ford 801? I am having a hard time trying to find them. Also, would filling the front tires with fluid really add any...

Hi all, new to forum. Have a question about a Ford 800 series tractor. Recently I have converted over to alternator and electronic ignition (coil was replaced as well). However now when the...

OK guys, let's kick the tires on this 801 SOS. I have been warned about these trannies, but the tractor looks so "straight", I can't help but being interested. It was owned by the girls...

gshiffle Hello, My name is George and I am new to the forum. I have a Ford 801 diesel tractor. runs and starts great, hot or cold. Maintains good oil pressure (hot and cold) problem is, when...

gshiffle Ford 801 diesel tractor Hello, My name is George and I am new to the forum. I have a Ford 801 diesel tractor. runs and starts great, hot or cold. Maintains good oil pressure (hot and...

Hello, My name is George and I am new to the forum. I have a Ford 801 diesel tractor. runs and starts great, hot or cold. Maintains good oil pressure (hot and cold) problem is, when it gets hot...

I have a 1956 Ford 801 Powermaster with factory power steering. I dont use the tractor that much and over the years have repaired the power steering parts hoses, cylinders, used pump etc. I have...

Hello, I finally joined after lurking for years lol....I am working on my 801. Months ago I took it apart for a complete overhaul and now I'm finally getting it back together but I think i'm...

Can anyone tell me if the front end loader (complete with pump and valves) Off of a Ford 8N, will fit my 1959 Ford 801?

Old tractor has been sitting for year since getting a new one. Have it sold but can't get it to run. No Spark. Did some voltage readings below and need help knowing what to do. Any help is...

I cannot find a toolbox on my 1959 Ford 801 tractor. However, a Google search shows that there was one made to fit it. Anybody know where it mounts?

We rebuilt the Hydraulic pump and installed it back on tractor. The lift doesn't work and there is no oil coming out of the drain on top of pump if removed. Do I have air in the system and if so...

any body know where u cam get a parts diagram for loader 703 lift cyclender .mine are leaking think i found seals but the cast peice that goes after nut is broken

I have a dealer close that has a nicely maintained Ford 801 for $2000. I need a tractor to bushhog, plow, disc, rake and sickle bar mow with. I am not used to a single stage clutch tractor and...

I just recently bought a 1959 Ford 801 Powermaster, 821 model, tractor. It runs good but needs some TLC. It will idle at higher RPM's with no problem, but when you slow down the idle speed it will...

My Pastor has an old 801 Ford industrial, he thinks around a 64 or 65 ish gasser with a loader on it. He says the shift fork come undone in the transmission so it doesn't shift. Guess the cover of...

I'm thinking of buying a frozen-engine 801 as a parts tractor for my 860. Other than the later year, what does the 801 have or not have? Does the 0 indicate no PTO? Owner said it was a 5 speed...

Just bought a 801 with a backhoe and front loader. I want to plow, and use the pto for my brush hog. Is it difficult to remove the backhoe and what is the procedure if it is doable?

I was looking at a Ford 801 with a select-o-speed transmission and wondered if it worked like a syncro shuttle transmission. The videos I have seen on YouTube show the speed changes, but I...

Hello, I am very new to this so bear with me if I have no idea what I am talking about. I am going to be closing soon on a 4.5 acre home that is currently about half mowed and half brush. The...

hi, i have a 1959 ford 801 select-0-speed and have got a couple problems. we use it every week but the battery seems to drain in the morning when we go to start it, its a brand new battery and new...

Does anyone know how many 801 diesels were made? Saw a nice 841 diesel and just wondering if it's anything more desirable than the other models. I've always liked the 801's and thought someday I...

Does anyone know how many 801 diesels were made? Saw a nice 841 diesel and just wondering if it's anything more desirable than the other models. I've always liked the 801's and thought someday I...

Any one have any info or diagrams on the injector pump on this thing? It's leaking fuel into the oil and I dont know which seals to change out to stop it. I also need to re-wire the old girl and...

I have access to a 3/4 ton Chevy truck. Are there places that will rent trailers for a tractor? The move will be about 40 miles

I Know I should buy the manual, but enjoy reading others repair questions here, usually more comprehensive and concise. Have the replace the $3 shifter pin on a Ford 801. Do I have to remove the...

Opportunity to purchase (62) Ford 801 diesel. Worth? bad things thanks

1964 Ford 801 Powermaster Tractor $4750 someones got to snap this one up.....;)

My father-in-law is trying to deal with his brothers estate. Sitting in the field is a Ford 801 and 2000. What would these be worth running vs not running? I am not sure how long they have been...

I have a 1963 Ford 801 Powermaster. It likes to stall when it gets hot. I am thinking vapor lock but am not sure. If it is I am trying to figure out a way to fix it. The gas line does run...

Click the attachment link above to see my ole tractor.

Well, I've never posted in the vintage tractor forum before. But, here I am. My friend has a Ford 801 tractor with the original six volt electrical system. Recently, he jump started the tractor...