Obviously, this adapter fitting is severely damaged and must be removed. The nut between the threading is corroded so badly that it will not accept a wrench, and it appears to be seriously...
Hi All,
Considering going to look at a low hour used John Deere 3203, but I'm concerned about it's low loader lift capacities (John Deere 300). They seem to be much lower than most tractors of...
I have a JD 3203 Compact and was wondering why my steering was drifting after cutting grass. Noticed hydraulic fluid was spewing from the Power Steering Cylinder "Rod Guide" seal. Looks like a...
My tractor won't start, and I believe I've eliminated everything except a problem with the starter itself. I removed the 2(?) bolts holding it in place, and it doesn't want to budge. Do I get...
I just bought a JD 3203 and I am in search of a used loader or reasonably priced new loader for it. So far all I can find is a new John Deere loader at $4800 and mid Feb 2018 delivery. Any insight...
While brush hogging yesterday after 3 hours of running fine it started to die out then rev up . 911 hours on tractor and this is the first time its done this. I stopped cutting and while heading...
I have a 2006 John Deere 3203 that has been relatively free of issues but within the last week after being used the tractor sat for a few days and then would not start. Since it was the original...
I am having an issue with the down pressure on the FEL. I can put the bucket down flat on the ground. Then use the tilt and it will pick up/pull up the main boom arms. When i tilt back (IE make...
2007 model 3203 started it up and in 5 min. gauge on red , radiator feels cold and it is full . Does this indicate a bad water pump or could it be a valve stuck ? 885 hours and so far over 3,000...
Looking for someone who has specific knowledge about tapping in to a JD3203 hydraulics system to add another function like a hydraulic top link...
JD does not have a power beyond kit for this...
Need to purchase something in 30+ HP range, with FEL & 4wd, Hydrostatic. Hours on both machines are low for age (below 300). Please let me know your thoughts and experiences on either (or both)...
I was wondering if anyone else has had an issue like this with their 3000 series JD? My tractor will be 9 years old next month and has 480 Hr.
Okay, so here is how it went. It is long so if you...
John Deere 3203 clicking when attempting to start with good battery. Does this model have starter solenoid? What else would cause a clicking sound? Appreciate any feedback.
My fan belt pulley has broken on my JD 3203. In order to replace, I need to remove the fan. Does anyone know if there is a way to remove the fan without removing the radiator?
Thanks.
I got a brief look at a John Deere 3203 tractor today and I was wondering what the pros and cons of those machines are? The machine in question is a 2006 vintage, about 530 hours, 300-series...
I have a JD 3203 Compact Utility Tractor. The front loader works fine, no limitation on lifting. When nothing is on the rear 3 pt lift it goes up and down fairly good, but maybe not the full...
New to the forum. My 3203 JD has 250 hours on it and I have an intermittent problem. The three point hitch raises very slowly from time to time. Lowering is no problem. Front end loader works...
So im a bumbling idiot sometimes. While clearing an area of brush, i got my BB hung up on a stump on the back corner and bent a draft link lift arm. While trying to bend it back, i snapped it. Now...
Newbie here looking for advice from the pros...
This weekend, the battery on my JD 3203 died. The manual suggests two ways to remove the battery --- lifting it out vertically or removing the...
I have an opportunity to buy a JD 3203 with a model 300 loader. +- 300 hrs on it for $11,500. It has been garage kept and very well maintained. Does this sound like a good deal? Are there any...
Hello, need help on getting the cover off around the trottle lever to tighten it so it does not slip and hold in gear...We have taken it in to john deere 2 years in a row to have it serviced and...
I just picked up a new 3203 (my fist tractor!) and while brush hogging yesterday, it died multiple times. After I cleaned off the screen and it cooled down(?) it started back up. Today same...
My dad bought a 3203 at an auction this summer and wants to add rear services. JD doesn't offer them in this model. Has anyone put the electric diverter valves in that would allow him to use the...
I have found a JD 3203w/300 loader for $12,500 beautiful machine. I googled some reviews and they were terrible so I am hoping for some feed back on the model and price.
I'm looking at a small 30hp tractor with front end load, box blad and brush hog. I am going with 4wd and have did comparisons and read different reviews.
Now it is time to ask for opinions of...
Newbie here looking to buy! JD and Kubota are my local dealers. Trying to decide btwn which model. Was leaning torwards the L2800 until I saw and drove the 3203. L2800 is less expensive and...