Z-Force 50 Hour meter froze HH8.7

   / Z-Force 50 Hour meter froze HH8.7
  • Thread Starter
#11  
After some research I discovered that the unit has a built in battery source but takes its signal from the impulse of one of the spark plug wires. When I zip-tied the lead wire to the spark plug wire it started to function again, and has worked perfectly since.

Mine froze, but it froze with HH8.7, not the number of hours (around 150). So, I don't think mine just lost it's signal. But, I will try to check the wires leading to it again.
 
   / Z-Force 50 Hour meter froze HH8.7 #12  
I purchased a used Z-Force 48 a couple of months ago and its hour meter was frozen at 205.1 hours.(Note: the meter on my machine has only the hour function.) After some research I discovered that the unit has a built in battery source but takes its signal from the impulse of one of the spark plug wires. When I zip-tied the lead wire to the spark plug wire it started to function again, and has worked perfectly since.

Interesting! That almost sounds like an aftermarket hour meter. The one on mine starts timing with just the ignition on.

Joel
 
   / Z-Force 50 Hour meter froze HH8.7
  • Thread Starter
#13  
Interesting! That almost sounds like an aftermarket hour meter. The one on mine starts timing with just the ignition on.

Joel

I believe this is standard: when the iginition is on it is counting.
 
   / Z-Force 50 Hour meter froze HH8.7
  • Thread Starter
#14  
I changed the oil and filter in the Z-Force over the weekend. Checked the wires going to the hour meter again. Everything appeared fine.... other than the meter froze on something goofy and no longer working.

Unless someone has an affordable option, I guess I will just guesstimate my hours each year and not replace the hour meter. $50 to $60 bucks just seems crazy for an hour meter.

Thanks, for input.
Greg
 
   / Z-Force 50 Hour meter froze HH8.7 #15  
Interesting! That almost sounds like an aftermarket hour meter. The one on mine starts timing with just the ignition on.

Joel

The Z-Force mowers with Briggs engines used a signal wire from the ignition. On all the other models(Kohler, Kawasaki engines) the hour meter runs anytime the key is on.
 

Tractor & Equipment Auctions

2014 GENIE GTH-5519 TELESCOPIC FORKLIFT (A51242)
2014 GENIE...
DODGE PICKUP BUMPERS (3) (A50854)
DODGE PICKUP...
71063 (A49346)
71063 (A49346)
2014 FREIGHTLINER CASCADIA (A50854)
2014 FREIGHTLINER...
2018 RoGator 1100C (A51039)
2018 RoGator 1100C...
EVERYTHING SOLD AS-IS WHERE IS!! (A50774)
EVERYTHING SOLD...
 
Top