Z-Force 50 Blade spindle greasing

   / Z-Force 50 Blade spindle greasing #11  
I have a 2544 with about 10 hours on it. I just did the first oil and filter change and greased the spindles. You make greasing the spindles sound easy. What's your secret?
 
   / Z-Force 50 Blade spindle greasing #12  
I have a 2544 with about 10 hours on it. I just did the first oil and filter change and greased the spindles. You make greasing the spindles sound easy. What's your secret?
 
   / Z-Force 50 Blade spindle greasing
  • Thread Starter
#13  
The Z-force 50 pulley covers didn't have access holes for the grease fittings so I modified them and my grease gun has a flexible hose instead of a rigid pipe. Also on this mower the outer spindles are clear of the frame. Your tractor from what I can tell from pictures on the Cub web site has the spindles under the footrests. But it looks like there are rubber access hole plugs.
 
   / Z-Force 50 Blade spindle greasing
  • Thread Starter
#14  
The Z-force 50 pulley covers didn't have access holes for the grease fittings so I modified them and my grease gun has a flexible hose instead of a rigid pipe. Also on this mower the outer spindles are clear of the frame. Your tractor from what I can tell from pictures on the Cub web site has the spindles under the footrests. But it looks like there are rubber access hole plugs.
 
   / Z-Force 50 Blade spindle greasing #15  
Why couldn't they have put holes in the covers to allow access? My Wheel Horse does.
 
   / Z-Force 50 Blade spindle greasing #16  
Why couldn't they have put holes in the covers to allow access? My Wheel Horse does.
 
   / Z-Force 50 Blade spindle greasing #17  
</font><font color="blue" class="small">( I have a 2544 with about 10 hours on it. I just did the first oil and filter change and greased the spindles. You make greasing the spindles sound easy. What's your secret? )</font>

How do you mean? I just lower the deck as far as it will go and grease away! I have been looking at a 90* adapter for the center spindle though as that one can be a little tricky.

I also found loosening the coupler on the grease gun a turn or so makes things MUCH easier (since you don't have such a hard time getting the damned thing off the zerk)!
 
   / Z-Force 50 Blade spindle greasing #18  
</font><font color="blue" class="small">( I have a 2544 with about 10 hours on it. I just did the first oil and filter change and greased the spindles. You make greasing the spindles sound easy. What's your secret? )</font>

How do you mean? I just lower the deck as far as it will go and grease away! I have been looking at a 90* adapter for the center spindle though as that one can be a little tricky.

I also found loosening the coupler on the grease gun a turn or so makes things MUCH easier (since you don't have such a hard time getting the damned thing off the zerk)!
 
   / Z-Force 50 Blade spindle greasing #19  
A 90* adapter sounds like a great idea for greasing the center spindle.

By the way, I broke the plastic oil drain plug on my very first oil change. (Didn't turn it far enough or pulled too hard.) Rather than make a trip to the dealer I replaced it with a 3/8 pipe nipple, elbow, and plug. It works well. I probably won't bother to replace the broken plastic plug.
 
   / Z-Force 50 Blade spindle greasing #20  
A 90* adapter sounds like a great idea for greasing the center spindle.

By the way, I broke the plastic oil drain plug on my very first oil change. (Didn't turn it far enough or pulled too hard.) Rather than make a trip to the dealer I replaced it with a 3/8 pipe nipple, elbow, and plug. It works well. I probably won't bother to replace the broken plastic plug.
 

Tractor & Equipment Auctions

Deere 9965 Cotton Picker (A51039)
Deere 9965 Cotton...
2015 Kenworth T400 T/A Vactor 2100 Combination Sewer Jetter Vacuum Truck (A50323)
2015 Kenworth T400...
2006 INTERNATIONAL MA045 DAY CAB (A51219)
2006 INTERNATIONAL...
TOOLBOX (A50854)
TOOLBOX (A50854)
2006 KENWORTH T300 SERVICE TRUCK (A51243)
2006 KENWORTH T300...
2008 JACK COUNTY  130BBL VACUUM TRAILER (A50854)
2008 JACK COUNTY...
 
Top