YouTube site popped-up

prs · Nov 26, 2020

Ventrac 45Z-Greasing the infamous U-Joint and removing side panels-BLUE CORD Property Care - YouTube

This felllow has a Z and such, he seems to do a nice job.

prs

prestond · Nov 30, 2020

Good find! Thanks.

johara1 · Dec 1, 2020

I would sure like to see one for a 45P, the 45Z is wide open..... jim

prs · Dec 1, 2020

Jim, what do ya mean by "wide open"?

I did see a review covering the P, Y, and K, but just talk other tahn maybe running the Y. If I find it I will let ya know.

prs

johara1 · Dec 6, 2020

The P is a total nightmare, it is almost impossible to get your hand in. I ended up drilling a 3/4" hole in the side so I can get a 1/8" pipe set up I made for the grease gun to go on the front Zerk fitting. The rear one is wide open from the top in the rear of the radiator..... jim

prs · Dec 6, 2020

I see, but even my Z is not wide open. Easier tha your P, I will agree, but even the Z is cuss worthy. I also bent a metal grease pipe that will let me get to it from the right, but I still prefer the left side, losing some skin on my wrist... Oh well, Life is not supposed to be easy.

prs

johara1 · Dec 7, 2020

Drilling the Hole on the right side was the answer.... it lets me to go through the bottom of the core support and straight on the front Zerk and push the grease gun on from the out side. The only reason I have my hand in there is to guide iron the fitting.... this something they could do at the factory. I guess they don't want things to be easy....... jim