YM2200 troubles continue

[jimsxl]

Hi guy's In the process of re- building my engine, the machine shop called today and said the liners (sleeves) would not fit my eng.They are too long, and the lower o-ring area is too short.My parts supplier lists the Ym2200& theYm2700 as taking the same liner.Has anyone ran into this before? Bummer,two hour drive!Thanks Jim

 

[1danny]

Hi guy's In the process of re- building my engine, the machine shop called today and said the liners (sleeves) would not fit my eng.They are too long, and the lower o-ring area is too short.My parts supplier lists the Ym2200& theYm2700 as taking the same liner.Has anyone ran into this before? Bummer,two hour drive!Thanks Jim

Sure you have the right liners? What is the part #

Danny

All of the aftermarket liners that I know of for the YM2200 & 2700 will interchange.

 

[LMTC]

Are you certain the engine is stock? We've seen variations, particularly from a certain segment of the market......once had a person trying to buy parts for his YM2000 engine only to discover it was an engine from a YM1900 in a YM2000A (red) chassis.

The other possibility is that someone simply shipped the wrong sleeves.