YM2200 fluids

[6011Artist]

I got a YM2200 that has been sitting for 5 yrs and need my butt kicked but it was left outside. I want to drain the transmission, hydraulics, oil in engine and diesel fuel before I start it up. It was parked due to steering problems so I expect everything to function correctly when started.

I use Rotella 15-40 in the engine. I think 303 would be correct for the hydraulics. Does 303 also go in the transmission? How much does each one take? I want to be sure to have enough when I go to refill everything. Somewhere I think I read 7.5 qts of oil for engine if changing filter. Is this correct? How much 303 in hydraulics? How much fluid in tranny? I know I will fill each to proper dipstick reading but want a general idea as to how much to buy.

I plan to drain everything and let it sit for a day or so with plugs out to allow the sludge to drain complete. Anything else I need to do as a safety precaution? And yes, it WILL go under the shelter after I get it all fired up....lol. Didn't have a shelter 5 yrs ago.

Thanks in advance for all of your help. This forum is great for us DIY people.

 

[kenmac]

don't know about you'er 2200. But my 3110 only takes 5.8 gallons in the hyd/ trans. (which is the same fluid). my oil capacity is only 6.8 qts. I buy hyd/trans fluid 5-10 gal at a time

 

[6011Artist]

Thanks Kenmac for your reply. I am not familiar enough with your tractor to know if it would be the same as mine. So many tractors and each seems to be a little different. But thank you for your efforts and concern.

 

[kenmac]

welcome.Capacities may be different. But, You'er trans/ hyd system is the same fluid.....JD 303

 

[6011Artist]

Thanks Ken, just wanted to be sure before I put the wrong type in it. Easier to do it right the first time.