Ym1600 Yanmar

[Rocks91]

Ok. New starter came in the mail and it looks to be for a smaller motor. Said "yanmar various" so I gave it a try. Can I please just get a link or something to the right starter? I'm tired of f*cking with it. For those of you who haven't seen my other post I bought a old yanmar that wouldn't start thinking it was 'just' a priming issue lol. Oh, how much i have to learn right? I bought a nice fuse block so I can redo the wiring and a fuel/water separator because some past owner thought it was cool to bypass it with some gas filter. I'll post a pic before I change it. I need to go find a bolt to match the old separator holes first. Also I flopped the wheels back out so I had a wider footprint and found oil all over the inside of the wheel. Checked the transaxle and found it almost empty. I assume it's just a seal fix but tractors are a new animal to me. Please advise.

 

[bmaverick]

You have a Gray Market Asian tractor, not many people in this section have deep enough knowledge about it.

Best to ask in the vintage Yanmar section here,

Yanmar

Discuss classic and grey market Yanmar tractors and equipment!

www.tractorbynet.com

 

[Rocks91]

I'll try. Thanks

 

[Williy]

Rocks91 wil this work??

https://www.amazon.com/RAParts-Starter-124060-77011-Yanmar-9722809-492/dp/B0CMG165PX/ref=sr_1_1?crid=3IT41RKSAKI7E&dib=eyJ2IjoiMSJ9.jCUTg5ZtgpbEhWMRCpCvlTRO6rDPm7XN8tSDkvteufW03Alw5oZaJuH9OoFRCJC6THFPjk7frJrVw6h5RbZKoMXxEkWUVpC5QoM5TBgpTO8m4QFhnIxjDHRf7i5A0i9H7gGOZwwAd602-pxvrjRUdtGBe9ham1zDK8y3k_Bc3dH7l9YYpZlm-OfveJKdiyxY9tA4wfA8w1sgUkCPqQmpMRNvtuS79MMyRvrnc5G2Ajk.0GOcqLd9IVIBtSVYZPsBy3Cq8nXzCZXj1wuePVdUc2E&dib_tag=se&keywords=starter+for+yanmar+diesel+ym+1600&qid=1739089285&sprefix=starter+for+yanmar+diesel+ym+1600%2Caps%2C138&sr=8-1&xpid=5D_75K-NHMVrB

https://www.amazon.com/SOLENOID-YANMAR-TRACTOR-ENGINE-23343-G7001/dp/B07GBF8GWD/ref=sr_1_3?crid=1REH3ARBWI7Y2&dib=eyJ2IjoiMSJ9.xsFcnGL0gQ_A0MI8Gbc7KHziljrLOjD0Fto68CyasFyrbs55oBr0lVvw5ciClTu8V9Ury1yo_4JGP6s7xFyx_HNIc7aqIMJUXLK0UKDKD8ddDUo5IIulhmkP8GO9lo21pAX1lO16hhkpl8ugLj7St8TSQAGCcTvtCQ0aN8JCnlUKHPSJ6176iWIhMRXa3mmIBMHjSEbWzpjdvuD5dLMa2e_3XBvnjf2LuOywsq2X9AQ.V8vMWsEsPrzzlIF2YlBBvWyk-N8pFDvVkOewXC6ofzc&dib_tag=se&keywords=Yanmar+2TR16+diesel+starter&qid=1739089057&sprefix=yanmar+2tr16+diesel+starter+%2Caps%2C207&sr=8-3

on your old started it its not burned up enery cloth will clean the armuture and new brushes

willy

 

[Rocks91]

the windings were falling out when i opened it up to clean it. turns out a ym2000 starter works perfect.