BTI
Platinum Member
It will handle a 4ft with no trouble.
Might need weights on the front.
BTI
Might need weights on the front.
BTI
YM1500D cutter?
- Thread starter Rowdius
- Start date
- Views: 3319
I just bought a Standard Kingkutter 4' and I had the same problem with the lower plug on the gearcase, Manual says to add oil to the plug hole, good luck with that! Well I had to use the dipstick measure also. How easy was yours to mount on your 3 point? I took off upper 3 point to get it mounted and they are spread as far as they will go, On my 5' blade i was able to turn the pins inward which was easier to hook up.
