montville524
New member
looking to buy a troy bilt 6hp pony. ser# 12181 1206020. anybody know the year. it shows it was built by garden way.
year of tiller
- Thread starter montville524
- Start date
- Views: 1601
2720wes
Silver Member
- Joined
- Jun 27, 2008
- Messages
- 129
- Location
- Northern Virginia
- Tractor
- John Deere 2720, John Deere GT225, GX345
I tried those numbers at the MTD online manual site and came up with 1999.
If you have a Briggs & Stratton engine check the code number, the first two numbers are the year, the second two numbers are the month the engine was made. Should be 99, maybe 98.
If you have a Briggs & Stratton engine check the code number, the first two numbers are the year, the second two numbers are the month the engine was made. Should be 99, maybe 98.
DennisArrow
Platinum Member
- Joined
- Jul 4, 2003
- Messages
- 770
- Location
- Sugar Valley, Ga
- Tractor
- Iseki TL 2300, Kubota RTV, Kubota B7610
On my horse, on the top of the transmission on the left side is stamped...."083 58".......any thoughts on the year?????.......It has a B&S engine but the code numbers on the shroud are not really readable so no help there......Am positive about the numbers on the transmission though.....Any help is really appreciated.....God bless......Dennis
2720wes
Silver Member
- Joined
- Jun 27, 2008
- Messages
- 129
- Location
- Northern Virginia
- Tractor
- John Deere 2720, John Deere GT225, GX345
Dennis, this number I am not sure about. I don't see any 5 digit serial numbers that start with 0. Now if the 8358 is the serial number that would be a 1969 model. If your horse is very old, no pto, tines always turn then maybe this is the year.
DennisArrow
Platinum Member
- Joined
- Jul 4, 2003
- Messages
- 770
- Location
- Sugar Valley, Ga
- Tractor
- Iseki TL 2300, Kubota RTV, Kubota B7610
The tines are always active, unit has one belt for changing speed, 8 hp elect start B&S, and runs great......Yes, it uses a bit of oil when working, perhaps a quart over 3 or 4 hours; but pulls great even when deep......
I just went out and checked that Serial number again.......yes, that's it.....for the first time I noticed that there on the housing on top of the transmission that holds the T handle that you tighten to move the "handles".........anyway there next to the serial number is an etched or stamped into the metal an arrow pointing to the serial number with the words "serial number"......cool......thanks for your trouble.....God bless
I just went out and checked that Serial number again.......yes, that's it.....for the first time I noticed that there on the housing on top of the transmission that holds the T handle that you tighten to move the "handles".........anyway there next to the serial number is an etched or stamped into the metal an arrow pointing to the serial number with the words "serial number"......cool......thanks for your trouble.....God bless