plowboy767
New member
I'm trying to install remote hydraulics on my tractor so I can use a 3 point hitch log splitter. I really don't want to cut the lines because I don't really trust those compression tees. For the pressure line I'd like to just be able to tap into that valve under the seat but am not sure which port to tap so as not to negatively affect the lift arm performance. It seems like to me if I could find a diagram of how they plumb a front end loader that would open my eyes but am having trouble finding any service literature for my ym2000d. I'm also not exactly comfortable with where and how to plumb the return line from the remote quick connect sockets I will install to a tie in somewhere somehow to the line that runs out of the rear end reservoir to the suction port on pump. my log splitter has an open center valve and two lines with male quick s coming off of the cylinder. I would gratefully appreciate any experienced advice.
Sincerely
plowboy767
Sincerely
plowboy767
