Yanmar ym186d

[Lee River]

I installed a new hydraulic pump and all connections confirm control valve is in the center open position . Looking at the loader manual there should be another hose coming from the valve out connection ( under the seat ) and there is a plug that can be removed . This hose should now be connected to the power beyond port on the control valve ( using the correct fittings that thread into the valve body ) . I am assuming this will allow the 3 point hitch to work . But my main question is will the hydraulic system still be operating in the center open position without operating any accessories ?
thx
Don

 

[Lee River]

Answer is yes and the loader manual was must .

 

[Lee River]

Yanmar ym186d , loader plumbed as per manual everything working . The issue is the 3 pt hitch comes up to fast . Is there a solution to correct the upward speed ?