Yanmar 155D

   / Yanmar 155D #1  

204saskman

Gold Member
Joined
Jun 25, 2009
Messages
322
Location
Kelliher, Saskatchewan, Canada
Tractor
Montana 2844R Hst
So i want to change the oil's in my tractor. Its a 1980 155D Green in color. Im just wondering on what type to put in. I would guess the front diff would be 80W90 and the rear would be like 46W or Hydra trans or something like that. But i just want to make sure. Also i was on hoye tractors site and they have a little intake heater(grid heater i think) was just wondering where this goes and if it helps it start any easier. I was also wondering how to adjust the brakes as mine are getting very weak. I really like the tractor and im glad i found this site as there is alot of useful information on here.

Thanks

Kiel
 
   / Yanmar 155D #2  
I,m new to the Yanmars, I just recentlly bout a little 1300 , But I have 2 bigger Isekis & I allways use 85/140 gear oil in the front axles & Hydraulic/trans fluid for the gearbox & Hydrauilics in all of them .

I cant help you on the heater or brake adjustment as I haven,t had the need to do either yet . :D , Bob
 
   / Yanmar 155D
  • Thread Starter
#3  
hey thanks for the reply. Im just gonna tinker with the brakes today but i just wanted to make sure what oil to use for sure before i put something in that i shouldnt have.
 
   / Yanmar 155D #4  
The oil is sold under a lot of names like -JD303, HyTrans, J10A, J14A, J20A,B,C,D, J27A and other numbers. They will all say something like "Hydraulic/Transmission" oil.

The glow plug just goes into the threaded plug in your intake port in the head. Just remove the plug & it will screw right in. If you have a little low compression or it is really cold outside (clearly NOT the case here in TX today... :) ) it will help a lot with the starting.

Aaron
Hoye Tractor Parts
(940)592-0181
Contact Us
 
   / Yanmar 155D
  • Thread Starter
#5  
The oil is sold under a lot of names like -JD303, HyTrans, J10A, J14A, J20A,B,C,D, J27A and other numbers. They will all say something like "Hydraulic/Transmission" oil.

The glow plug just goes into the threaded plug in your intake port in the head. Just remove the plug & it will screw right in. If you have a little low compression or it is really cold outside (clearly NOT the case here in TX today... :) ) it will help a lot with the starting.

Aaron
Hoye Tractor Parts
(940)592-0181
Contact Us


Cool thanks for the reply. I might be ordering some stuff from you once i get back to work here in the next week or so as i need a filler cap and maybe a service manual and such. Thanks
 

Tractor & Equipment Auctions

2015 Ram 3500 Enclosed Service Truck (A52377)
2015 Ram 3500...
2008 VOLVO EC460CL (A52472)
2008 VOLVO EC460CL...
GENERATOR (A53843)
GENERATOR (A53843)
2013 Ford F-150 4x4 Crew Cab Pickup Truck (A53422)
2013 Ford F-150...
2015 FORD E350 16FT BOX TRUCK (A54607)
2015 FORD E350...
2022 Case IH Steiger 470HD AFS Connect RowTrac 4WD Tractor (A50657)
2022 Case IH...
 
Top