I'm looking at trading my YM135D for a 276D. Trouble is the 276D has turf tires and I want to put on ag tires. Trouble is these are'nt standard sized rims at least as far the pilot hole and bolt circle are concerned. For the rear I want an 8x24" rim with a 4" hole and a 7.5" bolt circle for 6 bolts. The front should be a 5x14" with a 3.5" hole and a 7" circle for 6 bolts. Any ideas would be appreciated. My best alternative may be to have some centres made for standard rims. I'm in southern Manitoba.
Yan. 276D need ag. rims
- Thread starter JamesM
- Start date
- Views: 1776
Normmm
Gold Member
- Joined
- Mar 1, 2005
- Messages
- 288
- Location
- Talladega county, Sylacauga, AL
- Tractor
- Yanmar YM2020D Satoh Beaver III Yanmar 1500
Check your manual for the various tire size options for the D model. Then contact a inporter like Hoye, LMTC, Fredericks, or Earnies tractor maybe someone near you. All Yanmar wheels for your selected tire sixe should fit. You should be able to get the the wheel with tires mounted.
pennwalk
Veteran Member
Some of the John Deere compacts(650,750,850,950,1050) had the same bolt patterns as they were made by Yanmar. Do you have a tractor dismantler near you. Also I don't know if it makes any difference but I think the Yanmar bolt patterns were metric.
Chris
Chris
buppy69
Platinum Member
I'd guess there are a dozen people on this forum that would give their eye teeth to trade wheels with you.
Eugene
Eugene