Y'all Been Checkin' Lumber Prices?

   / Y'all Been Checkin' Lumber Prices? #1,202  
I remember when I was a kid, Dad decided to build a 60'x40' barn. We found some nice maple trees in the woods. We then cut and hauled them to a local sawmill for the lumber. The lumber was full 2x4's for the studs. I remember when we put up the studs and siding that you could not put a nail into that maple without drilling a hole first. The maple was about as hard as steel.
 
   / Y'all Been Checkin' Lumber Prices? #1,203  
Why do they call it 2x4 when it's 1.5" X 3.5"?
My old house the 2x4s measure 2" X 4".
That's what they start out as in the log. Once they take off saw kerf, dry and plane them and you end up with the nominal size which you mentioned. Hey, at least the 8 foot length isn't 94 inches.
 
   / Y'all Been Checkin' Lumber Prices? #1,204  
My father once built a 96' long greenhouse, and installed water faucets in the middle of each side. Then he bought a 50 foot hose...
It wasn't long enough to reach the ends.
 
   / Y'all Been Checkin' Lumber Prices? #1,206  
That's what they start out as in the log. Once they take off saw kerf, dry and plane them and you end up with the nominal size which you mentioned. Hey, at least the 8 foot length isn't 94 inches.
Yeah, but in my experience they usually ARE 96 and 1/8" long or so. If you want exactly 8 feet, you have to check and trim them. It's annoying, but better than the alternative.
 
   / Y'all Been Checkin' Lumber Prices? #1,207  
I just had to buy some pressure treated 2X4X8's over the weekend to complete a small project here. They were $15.98 each!!! Glad I am not building anything where I need significant amount of lumber...that is crazy pricing!
 
   / Y'all Been Checkin' Lumber Prices? #1,208  
I just had to buy some pressure treated 2X4X8's over the weekend to complete a small project here. They were $15.98 each!!! Glad I am not building anything where I need significant amount of lumber...that is crazy pricing!
I just bought 6 this past weekend myself, $11 something here.
 
   / Y'all Been Checkin' Lumber Prices? #1,209  
Hopefully they're not selling much at those prices and maybe the prices will come down some.
 
   / Y'all Been Checkin' Lumber Prices? #1,210  
I just had to buy some pressure treated 2X4X8's over the weekend to complete a small project here. They were $15.98 each!!! Glad I am not building anything where I need significant amount of lumber...that is crazy pricing!
OUCH!
 

Tractor & Equipment Auctions

1994 Prevost Liberty Coach 40FT Class A Motorhome (A51694)
1994 Prevost...
WOODS RT48.30 LOT NUMBER 235 (A53084)
WOODS RT48.30 LOT...
2021 JOHN DEERE 8R340 LOT NUMBER 209 (A53084)
2021 JOHN DEERE...
2025 New/Unused LandHero 16in Concrete Cutter (A51573)
2025 New/Unused...
NEW Wolverine 36'' Skid Steer Grapple Bucket (A53002)
NEW Wolverine 36''...
2012 Ford F-550 4x4 Versalift VO36I-01 36ft Insulated Bucket Truck (A52377)
2012 Ford F-550...
 
Top