xuv tires & wheels

[ghitch75]

here is what i decided to get...26"....let me know what you'al think?

 

[Shelbytt]

I ended up going with after market ITP Wheels and using Wheel Adapters from 5lug to 4 lug.. Turned out Sweet.. Love the ride...

 

[rut3556]

I went with the same tires on my 3010 Mule, but used ITP SS108 machined rims.

 

[TOMMYHPX4X4]

your gonna luv them 589's i know i luv them on my hpx i been havin a flat in the rear drivers side for a few months now and i still never got around to fixin it yet . they are pretty much a run flat tire.

here is what i decided to get...26"....let me know what you'al think?

 

[ghitch75]

will i changed my mind....

2" lift,bedrails,full under body armor....check out the wheels...there called buckshot's...zoom in and you'll see the rifle and shotgun casings!!...26" MUDLITES.......

the camo's only came in 12x7...the buckshot's are 12x8...and i went with the mudlites for weight savin'...

BTW..for guys with 2" lift....how do you reset the camber on the frontend after lift?

 

[TOMMYHPX4X4]

your stuck with the camber in the front end . why did you put a lift kit with 26's it's gonna wear out the cv's/tie-rods for nuthin?? it looks nice with the stuff on it but i would yank the lift kit.

 

[ghitch75]

your stuck with the camber in the front end . why did you put a lift kit with 26's it's gonna wear out the cv's/tie-rods for nuthin?? it looks nice with the stuff on it but i would yank the lift kit.

thats what i'm going to do...i put HD shocks on too and they are about 3/4" taller than the stock shocks..

 

[TOMMYHPX4X4]

good deal with the 26's and the heavyduty shocks you don't need the lift troubles.