XR3037HC Couple questions

[BSHfieldmaster]

Hey George, I'll try and get some pics of my hot rods, they are in the shop and garage, the poor new tractor is still sitting outside until I make some room from moving my folks to assisted living, I can't even get to the cars because if the junk......hate to admit it, but mine have the oval on them, some with chev engines however! I heard that the one that dies with the most toys wins the race.....lol!!

 

[George2615]

Hey George, I'll try and get some pics of my hot rods, they are in the shop and garage, the poor new tractor is still sitting outside until I make some room from moving my folks to assisted living, I can't even get to the cars because if the junk......hate to admit it, but mine have the oval on them, some with chev engines however! I heard that the one that dies with the most toys wins the race.....lol!!

That's the way I figure too. All of mine are Bowties. 72 Chevelle Convertible 402 auto, 79 Corvette L88, 2012 Camaro SS loaded with options, 2013 Chev Truck also loaded and the new 2014 LS3030HC.
I also noticed the same thing in the LS. Could plow snow in a T-shirt and shorts with the amount of heat it puts out. I too cut the heat way down and had the back side windows open.

 

[BSHfieldmaster]

Well I am certainly happen with mine, I will always question whether I should have bought the 4040 or ordered the 4046, but so far I haven't found anything that the 3037 can't do that I need, it's so much more comfortable than my old NH1725 without a cab. I haven't given the NH to the kids yet because the dirty work like moving manure etc is still being done with the NH!! We are forecasted for 10 inches tonight of heavy spring snow and the wind is howling, so tomorrow's plans am get put on hold, but at least I can play in the snow with the new tractor! Think I will put some 50's and 60's CDs in the stereo while I plow! Lol! I have a '68 mustang fastback GT, a '03 Mach 1, several model a's that are all modified and one deuce roadster, I don't show them, just for cruise nights or to the local drive in for a summertime malt! I like my old cars, around here the weather can be deterrent as well as the jerks on the roads, but once in a while they think they can take you at a light and you just barely have to crack the throttle and can leave the rice burners or big diesel trucks with the stacks coming out of the bed in the dust, makes you feel like you are a kid again!! Big time LOL!!

 

[mjstef]

Well I am certainly happen with mine, I will always question whether I should have bought the 4040 or ordered the 4046, but so far I haven't found anything that the 3037 can't do that I need, it's so much more comfortable than my old NH1725 without a cab. I haven't given the NH to the kids yet because the dirty work like moving manure etc is still being done with the NH!! We are forecasted for 10 inches tonight of heavy spring snow and the wind is howling, so tomorrow's plans am get put on hold, but at least I can play in the snow with the new tractor! Think I will put some 50's and 60's CDs in the stereo while I plow! Lol! I have a '68 mustang fastback GT, a '03 Mach 1, several model a's that are all modified and one deuce roadster, I don't show them, just for cruise nights or to the local drive in for a summertime malt! I like my old cars, around here the weather can be deterrent as well as the jerks on the roads, but once in a while they think they can take you at a light and you just barely have to crack the throttle and can leave the rice burners or big diesel trucks with the stacks coming out of the bed in the dust, makes you feel like you are a kid again!! Big time LOL!!

Can you park your 1725 next to your 3037 and take a pic of both with the loaders in the air? I would really like to see the difference. I think the 3037 that i looked at really lacks in loader height but i'm not sure i want to get as big as the 40 series. Also could you measure the rear tire with? I forgot when i was at the dealer and they are 250 miles away one way. Thanks in advance!!!!!!!

 

[George2615]

Can you park your 1725 next to your 3037 and take a pic of both with the loaders in the air? I would really like to see the difference. I think the 3037 that i looked at really lacks in loader height but i'm not sure i want to get as big as the 40 series. Also could you measure the rear tire with? I forgot when i was at the dealer and they are 250 miles away one way. Thanks in advance!!!!!!!

Rear tire width on the 3037 is 13 1/2" (Actual tread width of the R4 lugs), 16" to the sidewalls. The rear R4 Tires are 43x16.00-20.

 

[mjstef]

Rear tire width on the 3037 is 13 1/2" (Actual tread width of the R4 lugs), 16" to the sidewalls. The rear R4 Tires are 43x16.00-20.

Thanks, I was looking for outside to outside or width of the tractor from outside of the tires.................

 

[George2615]

Width from one side to the other is 66"

 

[breadtrk]

I'm starting to worry about my dealer, it has been 11 days since we made the deal and they still can't give me a delivery date.

 

[breadtrk]

Somehow, 45 minutes after I called to cancel my order since they still couldn't give a delivery date........ they call and say it will be here Thursday and I can pick it up next Friday.

Funny how that works....

 

[breadtrk]

Dealer just called, it is sitting on the lot.

 

[George2615]

Glad it's on the lot. Now you just have to get it. I know you said you were going to pick it up on Sat. Didn't the dealer offer free delivery? Mine did but I needed it right away so I picked mine up.

 

[breadtrk]

I'll give the pictures thing a shot. Here it is. Delivery in the morning.

 

[George2615]

Well I am certainly happen with mine, I will always question whether I should have bought the 4040 or ordered the 4046, but so far I haven't found anything that the 3037 can't do that I need, it's so much more comfortable than my old NH1725 without a cab.

My XR3037HC is as large as I could go in order to use my current trailer to haul it. Plus at this point I really don't need anything larger. I did however just purchase a dump trailer. I pick it up on Friday afternoon. I'll post pics and the specs then. I'll probably post them in the trailer section and the LS section. It's another tool to use.

 

[vwnotrunning]

Are the sides on your dump trailer low enough for the backhoe to load?

 

[George2615]

If you are asking me, I dont have a bh for my 3037. If I did it would fit on my 20' tilt bed. I wont have the dump trlr. until Fri. aft. It is a 16'er with 20" sides. Will post pics and measurements when I get it home.