XG3135 bucket tilt problem

[Walter L]

My LL3112 loader bucket cylinder will go out all the way but wont come in all the way it likes about 4 inches, i thought i might have bent one of the cyl but removed the lines and they will collapse all the way then thought the rear 3 point might be to high lowered it still no go. I guess it could be a control valve problem? , i made a appointment to take the tractor next Tuesday i will report back on repairs.
Does anyone have any ideas or had this problem before?

Walt

 

[Walter L]

Well the problem is fixed and im a little embarrassed to post what the problem was. Mt front end loader hoses are not attached to a bracket like some they just lat inside the right side FEL arm and one somehow came unlocked together but both ends were together and looked like they were locked together, simply re hooked and locked the lines together, simple fix for a simple minded old man.

 

[Tymanthius]

Well the problem is fixed and im a little embarrassed to post what the problem was. Mt front end loader hoses are not attached to a bracket like some they just lat inside the right side FEL arm and one somehow came unlocked together but both ends were together and looked like they were locked together, simply re hooked and locked the lines together, simple fix for a simple minded old man.

I had this happen on the 3rd function valve for my grapple a few weeks ago. Suddenly wouldn't close. From the seat, everything looked fine. I was cussing, but at the moment I was mowing so I finished up. Get done and grab the line near the quick connect and it just pops out. WTF? You'd think it would have fallen off w/ all the vibration.