Xg3025 loader joystick boot. LL1101 loader

[chiefcook]

Has anyone replaced the loader joystick boot?
Not avaliable from LS Separately. I have heard about using cv joint boots, but the base on mine is square, not round. If I can't find anything, I will probably fabricate something out of an old inner tube.

 

[chiefcook]

Has anyone replaced the loader joystick boot?
Not avaliable from LS Separately. I have heard about using cv joint boots, but the base on mine is square, not round. If I can't find anything, I will probably fabricate something out of an old inner tube.

Apparently I can't type. The loader is a LL3110.

 

[Eagle1]

Have not measured mine but this may fit https://www.amazon.com/Feather-butterfly-36001-0180-Joystick-3SOF204111/dp/B07THQC6SY

 

[orezok]

I recentLy replaced the boot on my TNT. The original boot was not available after 18 years so I ordered a universal CV boot from Amazon. The base of my Joy stick is rectangular and the boot worked perfectly. Rubber boots don’t care what shape you put them on.

 

[chiefcook]

Thanks for the ideas. I found a boot on ebay that might work. Plus, it's blue to match my tractor.

 

[1 of U]

what happen to the original ? mine is a 2016
and has rips/tears

 

[chiefcook]

Mine has had cracks in it that I've sealed with rtv for a few years, but the cracks are to big to seal anymore.
It's about the same age as yours. I'm to cheap to spend $40 for the Amazon one.

 

[orezok]

Mine has had cracks in it that I've sealed with rtv for a few years, but the cracks are to big to seal anymore.
It's about the same age as yours. I'm to cheap to spend $40 for the Amazon one.

My universal boot on Amazon was $19. Some are even less.

 

[chiefcook]

Finally got around to changing the boot. It was to large, but worked great with some trimming.

 

[Mrsig]

Can you post the link for it.

 

[chiefcook]

Ebay.com different seller, but appears to be same item.

 

[Mrsig]

Thanks.