X739 transmission adjustment

[gjsnow]

Hi folks,
I’ve had my machine for cutting and snow removal for about 7 years now and it has been flawless with routine maintenance.
I would like to make an adjustment in the transmission. When my foot is off the pedal it still creeps a little forward.
I do not own a technical manual and bringing it to the dealer is a haul.
Has anyone done this service before who could help?
Thanks in advance.
GJSnow

 

[om21braz]

Here's a link to the parts breakdown of the pedals and linkage. It appears that turning the #29 rod clevis would adjust the pedals back to a neutral position. Maybe someone with a X series will chime in soon and confirm or correct me.

https://partscatalog.deere.com/jdrc/sidebyside/equipment/60575/referrer/navigation/pgId/218711252

 

[gjsnow]

Here's a link to the parts breakdown of the pedals and linkage. It appears that turning the #29 rod clevis would adjust the pedals back to a neutral position. Maybe someone with a X series will chime in soon and confirm or correct me.

https://partscatalog.deere.com/jdrc/sidebyside/equipment/60575/referrer/navigation/pgId/218711252

Thank you so much. I will look for this under the machine.
GJSnow

 

[beenthere]

If nothing visible underneath, may be visible after removing the seat and fender deck.. but likely you will find the adjustment obvious when getting to that point.