Accidentally had my remote valves connected wrong: Tank port was connected to what was actually power beyond hose and Power beyond port was not connected to anything. Of course I realized this as soon as I tried to use the other hydraulics, but would this damage the valve?
Would this damage remote valve
- Thread starter BeezFun
- Start date
- Views: 1077
oldnslo
Super Member
If you pressurized the tank port for a period of time you could extrude the seals on the ends of the spoils. Momentary pressure you probably didn稚 hurt anything.
With the power beyond port plugged your pump was at relief pressure. Again for a short period of time this should not be a problem.
With the power beyond port plugged your pump was at relief pressure. Again for a short period of time this should not be a problem.
farm boy00
Veteran Member
- Joined
- Jul 17, 2014
- Messages
- 1,296
- Location
- Howard City, MI
- Tractor
- John Deere M&MT, Case 1030 comfort king, Sears ST16, Craftsmen 6000, homemade articulation mini-loader
Only two ways to find out. Correct the problem and run it or tare everything apart first
