Canopy Worklight bar for m7040

   / Worklight bar for m7040 #1  

samofsweden

Gold Member
Joined
Oct 13, 2007
Messages
299
Tractor
Kubota Bx24, 2007
Hi, it was very long time since I posted here. Here is an update. I needed more work lights. I used parts of the orginal canopy mounts. I made a tubebar that sits a bit lower under the canopy. IMG_5022.JPGIMG_5021.JPGIMG_5022.JPGIMG_5018.JPG
 
   / Worklight bar for m7040
  • Thread Starter
#2  
IMG_5030.JPG
 
   / Worklight bar for m7040 #4  
Nice work.

Can you describe what the small curved pieces are used for shown in the first photo sitting on the table? It looks like you took time to cut and form them from some tubing, but didn't see where they are used or understand their function.
 
   / Worklight bar for m7040
  • Thread Starter
#5  
Moship these are for keeping the cable in place. I could routed the cable inside the tube, but its to much work so I decided to do this way
 

Tractor & Equipment Auctions

2021 Dosko 337S-13HC Walk-Behind Stump Grinder (A49461)
2021 Dosko...
2023 QUALITY CARGO 16 T/A ENCLOSED TRAILER (A50854)
2023 QUALITY CARGO...
Kenco PH9000 Self-Leveling Pipe Hook - 9,000 LB Capacity, 8FT Max Pipe Length (A51039)
Kenco PH9000...
2019 Caterpillar 815K Articulated Compactor (A49461)
2019 Caterpillar...
PAIR OF PIPE RACKS (A50854)
PAIR OF PIPE RACKS...
2005 WINNEBAGO WORKHORSE W22 RV (A50854)
2005 WINNEBAGO...
 
Top