Woods RC - spewing oil?

   / Woods RC - spewing oil? #1  

9973720wb19

Platinum Member
Joined
Jan 1, 2010
Messages
811
Location
East Coast
Tractor
Many
why is my 72' (farily new) Woods RC spewing oil out of the vent cap on top of the gear box? it's not a lot but enough that it's running down the sides of the gear box. :confused:
 
   / Woods RC - spewing oil? #2  
9973720wb19 said:
why is my 72' (farily new) Woods RC spewing oil out of the vent cap on top of the gear box? it's not a lot but enough that it's running down the sides of the gear box. :confused:

Is it over filled? If not I've hear folks say it could be getting hot. Does it do it after a few minutes or when IRS been run awhile?
 
   / Woods RC - spewing oil?
  • Thread Starter
#3  
Is it over filled? If not I've hear folks say it could be getting hot. Does it do it after a few minutes or when IRS been run awhile?

good questions. I'll have to check to see when it starts to come out. I think I'll let it run without mowing to see how long it takes to come out.
 
   / Woods RC - spewing oil? #4  
I have that problem with a Phoenix. Shouldn't have to come up with a solution to solve the problem on a new mower:mad:
 
   / Woods RC - spewing oil? #5  
First make sure it is not overfull. Take look at where the vent is located. If the vent is directly over the input gear the oil splash from the gear can go up the vent. If the bolt pattern on the cover is uniform, remove the cover and rotate it 90 or 180 degrees to move the vent away from the gear.
 
 

Tractor & Equipment Auctions

UNUSED JCT 40' CONTAINER (A51244)
UNUSED JCT 40'...
2012 JOHN DEERE 13-INCH REAR WHEEL SPACER FOR 10 BOLT HUB (A52748)
2012 JOHN DEERE...
2016 Ford Fusion Sedan (A50324)
2016 Ford Fusion...
1996 International 4700 Box Truck, VIN # 1HTSCABP2TH265415 (A51572)
1996 International...
2002 KENWORTH W900 TRI AXLE (A52472)
2002 KENWORTH W900...
Plasmarc PM150 Plasma Cutter (A51691)
Plasmarc PM150...
 
Top