Woods heritage hss72 set up

   / Woods heritage hss72 set up #1  

Grey Tractor Dude

New member
Joined
Mar 19, 2019
Messages
12
Location
Florissant, CO
Tractor
Kubota L 1500 DT
I bought a used Woods Heritage HSS72 and it looks like someone has done a custom setup on it. I need to put things back in their original position but don’t have any pics. Anyone know where I can get a free manual for this cutter or is willing to look at pics and tell me what to do?

With this set up, 7” is about as low as I can cut and keep the deck on a good plane (front about an inch lower than rear). The issue seems to be at the top link where it connects to a pivot arm and the height of the tailwheel.

Any suggestions?
Thanks
 

Attachments

  • IMG_0667.jpeg
    IMG_0667.jpeg
    2.5 MB · Views: 121
   / Woods heritage hss72 set up
  • Thread Starter
#2  
Well, this is embarrassing. Just as I clicked to post I figure out that my top link is extend about two inches too long. Once I adjusted the tl all I had to do was raise my tailwheel. 🫣
 
 

Tractor & Equipment Auctions

2010 HEIL TOKEN TRAILER (A52472)
2010 HEIL TOKEN...
Godwin CD150M 6in Dri-Prime Pump S/A Trailer (A51691)
Godwin CD150M 6in...
2007 IC Corporation PB105 Passenger Bus (A51692)
2007 IC...
New Skid Steer Attachment Plate (A53002)
New Skid Steer...
1999 Volvo VN Truck, VIN # 4VG7BBRFXXN772814 (A51572)
1999 Volvo VN...
NEW Wolverine Skid Steer Pallet Forks Hydro Adjustable (A53002)
NEW Wolverine Skid...
 
Top