Woodmaxx flail mower guys 62 and up come on in

[NateF350]

Hi guys I need some help, I have a landpride flail mower that needs new hammer blades. Landpride cost $45 a hammer new and I just refuse to pay anything close to that. Woodmaxx has some that I think will work but when I called woodmaxx they weren驕 just the most helpful citing liability. I was wondering if anyone could get me measurements of there hammer blades, specifically the mount end width, the total lenght, and the width of the cutting edge. Models that I think will work are 78/88/96

 

[leonz]

Hello Nate,

check with Hess farm equipment, zimmerman farm service and wengers of myerstown before you drive your self crazy and explain to them you have a maschio product that is painted as a landpride flail mower.

Leon


EDIT to add:


check with clean cutter to see if they do any casting for Maschio/Landpride hammer knives.

 

[NateF350]

Thanks Leon. I did a google search for maschio flail blades but didn’t find much. I’ll try these guys and see what they have to say

 

[joecdeere]

Check with “Flailmaster” biggest aftermarket flail company out there

They don’t list Landpride, but keep lots not shown in their catalog, good prices to

Flail Master - Your BEST Choice for Quality Mower PartsFlail Master | Your BEST Choice for Quality Mower Parts

 

[NateF350]

Thanks, I gave them a call but they said they didn’t have anything listed to fit

 

[bkrgi]

If I remember I can get some measurements of the FM62H hammers for you Saturday.

 

[ericm979]

If Woodmaxx isn't much help you could try one of the other companies selling chinese flails like betstco:
EFGC & EFGCH175 Hammer/Mulching Blade Set | Betstco

 

[bkrgi]

My hammers on the FM62 are 1 3/16" wide at the bolt end (brackets are spaced 1 5/16")
3 1/2" width on the cutting edge
4 1/4" from the top to cutting edge on the front face

 

[leonz]

My hammers on the FM62 are 1 3/16" wide at the bolt end (brackets are spaced 1 5/16")
3 1/2" width on the cutting edge
4 1/4" from the top to cutting edge on the front face

===========================================================================


Call the clean cutter folks in California on Tuesday morning they should be able to help you with this as they have the cast hammer knives you are looking for.

FM4088 and FM4188 hammer knives $26.00 each plus tax and frieght

Clean Cutter Tiller Blades

1-800-345-2335

george_clark@eee.org

 

[newbury]

I'd call Messicks. They suggested "alternate" parts for me in the past.