Which rod / electrode to use?

   / Which rod / electrode to use? #1  

oldnslo

Super Member
Joined
Jan 20, 2010
Messages
8,064
Location
Northern, IL
Tractor
Branson 2400H, JD X540
I purchased a set of drive-in style forks ( see picture) and have to weld the hooks onto the top of my FEL bucket. Bucket is 3/16" thick and 6" flat area for the hooks to be welded too. Would using 6011 for root pass and 7018AC for the top pass be the correct choice of rods for doing this or could I just run 7018AC for all the passes? I have a Lincoln 225 AC welder.
 

Attachments

  • bucket-forks.jpg
    bucket-forks.jpg
    16.2 KB · Views: 159
   / Which rod / electrode to use? #2  
6011 for the root pass is a great idea. Or you could grind a knife edge on the bottom of the hook, space the hook up a 1/16-inch or so and use 7018 all the way. I have done open root pipe with 7018, this is the results.
 

Attachments

  • Pealer DC-.jpg
    Pealer DC-.jpg
    134 KB · Views: 220
   / Which rod / electrode to use?
  • Thread Starter
#3  
Thanks Shield,
Since my welding skills have not gotten better with age, I will use 6011 and 7018AC. Hopefully I can get the helmet situated so the bifocals work and can get the job done. Bifocals and repair work just don't mix...
 
   / Which rod / electrode to use? #4  
I know what you mean! I can't wear my walking around glasses for welding. By the time I find the right spot, I have a big glob of metal setting there. I have one pair of reading glasses for SMAW, and GMAW, then another pair for GTAW.
 

Tractor & Equipment Auctions

2016 Ottawa Yard Spotter Truck - Cummins Diesel, Allison Auto, Hydraulic Air Fifth Wheel, 33,000 ... (A51039)
2016 Ottawa Yard...
2005 Case IH 2062 Flex Draper Header (A50657)
2005 Case IH 2062...
2015 MACK GU713(INOPERABLE) (A50854)
2015 MACK...
2019 BIG TEX GOOSENECK  TRI AXLE 34FT 2 CAR HAULER (A51222)
2019 BIG TEX...
2019 NEW HOLLAND TS6.130 TRACTOR (A51406)
2019 NEW HOLLAND...
2016 WINNEBAGO SCORPION 4014 5TH WHEEL CAMPER (A50854)
2016 WINNEBAGO...
 
Top