Price Check whats the pricing on the DK45SE HST?
- Thread starter leveled
- Start date
- Views: 4452
PAB_OH
Platinum Member
Are you buying new or is used an option? There's one near me for 18,900 with 132 hours on it. Prob get it down a bit more....
I don't know what new prices are so this may or may not be all that great.
I don't know what new prices are so this may or may not be all that great.
rcrcomputing
Platinum Member
With loader and hooks welded on.
40se hst 20,100.00
45se hst 21500.00
Delivered 150 miles.
40se hst 20,100.00
45se hst 21500.00
Delivered 150 miles.
wallace
Veteran Member, Approved Advertiser
Lift Height 107.8"
B - Clearance with Attachment Level 105.5"
C - Clearance with Attachment Dumped 79.9"
D - Reach at Maximum Height 16.1"
E - Maximum Dump Angle 73ｰ
F - Reach with Attachment on Ground 73.6"
G - Attachment Rollback Angle 30ｰ
H - Digging Depth Below Grade 6.7"
J - Overall Height in Carry Position 52.7"
L - Depth of Attachment (to back of inner shell) 20.7"
M - Height of Attachment 22.6"
N - Depth of Attachment (to pivot pin) 25.9"
Lift Capacity to Full Height at Pivot Pins 2,761 lbs
Breakout Force at Pivot Pins 3,727 lbs
Relief Valve Setting (Loader Control Valve) 2,556 psi
Rollback Force at 500mm forward on the ground 4,633 lbs
Rated Flow (Tractor System) 10 GPM
Lift Cylinder Bore 60 x Rod 35 x S.t 485
Bucket Cylinder Bore 55 x Rod 30 x S.t 525
Attachment used for Specification 72"
Raise Boom 7.6(1,500rpm),5.7(2,000rpm),4.5(2,600rpm)
Lower Boom 4.9(1,500rpm),4.8(2,000rpm),4.8(2,600rpm)
Dump Bucket 6.2(1,500rpm),1.9(2,000rpm),1.5(2,600rpm)
Retract Bucket 2.3(1,500rpm),2.2(2,000rpm),2.1(2,600rpm)
B - Clearance with Attachment Level 105.5"
C - Clearance with Attachment Dumped 79.9"
D - Reach at Maximum Height 16.1"
E - Maximum Dump Angle 73ｰ
F - Reach with Attachment on Ground 73.6"
G - Attachment Rollback Angle 30ｰ
H - Digging Depth Below Grade 6.7"
J - Overall Height in Carry Position 52.7"
L - Depth of Attachment (to back of inner shell) 20.7"
M - Height of Attachment 22.6"
N - Depth of Attachment (to pivot pin) 25.9"
Lift Capacity to Full Height at Pivot Pins 2,761 lbs
Breakout Force at Pivot Pins 3,727 lbs
Relief Valve Setting (Loader Control Valve) 2,556 psi
Rollback Force at 500mm forward on the ground 4,633 lbs
Rated Flow (Tractor System) 10 GPM
Lift Cylinder Bore 60 x Rod 35 x S.t 485
Bucket Cylinder Bore 55 x Rod 30 x S.t 525
Attachment used for Specification 72"
Raise Boom 7.6(1,500rpm),5.7(2,000rpm),4.5(2,600rpm)
Lower Boom 4.9(1,500rpm),4.8(2,000rpm),4.8(2,600rpm)
Dump Bucket 6.2(1,500rpm),1.9(2,000rpm),1.5(2,600rpm)
Retract Bucket 2.3(1,500rpm),2.2(2,000rpm),2.1(2,600rpm)
BTI
Platinum Member
Also.....
Tractor is around 200 lbs heavier. (sorry 'bout that)
1 set of remote hydraulics standard.
BTI
Tractor is around 200 lbs heavier. (sorry 'bout that)
1 set of remote hydraulics standard.
BTI
Last edited:
