Rims What rims will fit JD 950?

[Newtonx1]

I picked up an 85 JD 950. The wheels and rims on it are the wrong size and one is larger than the other. It also came with the original rims and tires, one is destroyed and both rims are riddled with rust. Looks like the only salvageable portion is the inner portion of them.

two questions: first, are there other rims that the inner part of the JD rim will fit and two, is there any problem keeping the larger rims/tires (as long as they're both the same size)?

 

[Spanner]

You need to maintain Front/Rear ratios for 4WD.

 

[Wolfy]

Will get costly but to save your clutch, axle bearings, etc, I would get the oem sizes. Selling the goofballs will help offset the price.

 

[silvertramp]

I just replaced a rear rim on my Yanmar 276D (4x4) with this: CH1975 - Rim fits John Deere | AFTERMARKET.SUPPLY
It says that it will fit your 950. Front rims are easier to find and cheaper. A Yanmar supplier might have those. Hoye for example.

 

[Newtonx1]

So I have been searching the internet and actually went to a couple places in southeast Missouri looking for wheels/tires. I'm told this size is extremely hard to find used so I am looking for new. I am in need of two 12.4x28 tires and the correct sized outer portion of the rims. An Ebay seller, Tucker Tire out of TN, has 2 new, 8 ply tires on 28 inch, 6 loop rims. The only thing I see different is that the loops are a different shape than those of the original rims. Has anyone had any experience with these or does anyone know if they will fit the inner parts to my rims?

Here are my current rims/tires. They are pretty well done for and the outer rims are rusted through.


Here is the link to the Ebay tires.
TWO 12.4x28,12.4-28 8 Ply JOHN DEERE 435 Tractor Tires on 6 Loop Wheels | eBay

Appreciate any help.

 

[Rhinoscanfly]

So I have been searching the internet and actually went to a couple places in southeast Missouri looking for wheels/tires. I'm told this size is extremely hard to find used so I am looking for new. I am in need of two 12.4x28 tires and the correct sized outer portion of the rims. An Ebay seller, Tucker Tire out of TN, has 2 new, 8 ply tires on 28 inch, 6 loop rims. The only thing I see different is that the loops are a different shape than those of the original rims. Has anyone had any experience with these or does anyone know if they will fit the inner parts to my rims?

Here are my current rims/tires. They are pretty well done for and the outer rims are rusted through.
View attachment 525276View attachment 525277

Here is the link to the Ebay tires.
TWO 12.4x28,12.4-28 8 Ply JOHN DEERE 435 Tractor Tires on 6 Loop Wheels | eBay

Appreciate any help.

Hello, I have a JD950 and was curious how things turned out? did you find rims or wheels for your tractor? I'm needing a couple rear myself, Thank you!

 

[yanmars]

I think a Yanmar 336 has similar wheels, need to confirm however

 

[Rhinoscanfly]

I think a Yanmar 336 has similar wheels, need to confirm however

i can see the similarities! nice, Thank you

 

[Rhinoscanfly]

Part numbers INFO RECEIVED FROM jOHN DEERE Dealership.....CH11078 RIM FOR USE WITH 12.4-28 TIRE.....CH12164 RIM FOR USE WITH 13.6-28 TURF TIRE NLA (no longer available) .......CH11077 WHEEL (center disk?) 28"