Kubota In Canada
Member
What is the ideal PTO speed to run a 48in Kubota flail mower?
Looking forward to your feedback.
Cheers!
Eric
Looking forward to your feedback.
Cheers!
Eric
Mowing What PTO speed for FLAIL MOWER
- Thread starter Kubota In Canada
- Start date
- Views: 8326
KennyV
Elite Member
- Joined
- Sep 1, 2004
- Messages
- 2,601
- Tractor
- Kubota L4200 GSTCA
Eric,
Fast to very fast actually the flail hammers/knives work best at high velocity. 540 PTO is right. KennyV.
Fast to very fast actually the flail hammers/knives work best at high velocity. 540 PTO is right. KennyV.
atgreene
Platinum Member
- Joined
- Aug 10, 2007
- Messages
- 868
- Location
- Sebago, Maine
- Tractor
- 2005 TB135 Excavator with Thumb, Quick Attach System, Ripper tooth, 3' Hydrauic Tilt Clean-up Bucket, Skeleton Bucket, 1986 Kubota 4150 with Loader and Quick Attach with Woods Forks, JD B, 1963 IH 504
I have a Kuhn 72" flail that I have to run at 540 to be effective. Even with 45 hp at the pto, it stumbles in tough going. I tried running it on the 750 pto and idleing the tractor back, but the motor stumbles on a load.
Kubota In Canada said:
If the Flail has a manual with it do what it says. I expect it will say 540RPM and if it does you don't want to exceed this. They have a lot of expensive bearings on them and you don't want to bust them up.
If it has no indication of what speed to run it at 540RPM is the best bet.
